Fuel pump in the system

Assignment Help Mechanical Engineering
Reference no: EM13865391

1. Where would you locate the fuel pump in the system so that the system will function correctly?

2.What size tubing would you specify from the pump to the engine?

3.Calculate the hA of the fuel pump.

4. If the pump is 30% efficient, how much power would it consume (in watts)?

A gasoline delivery system for an automobile consists of a tank, a pump, interconnecting tubing, a filter, a pressure regulator, and a distribution manifold going to the 4 injection nozzles, and a return line back to the tank.

The pump has a NPSHR of 10 feet. Max fuel temperature is 90oF. The fuel pump max flow is 4 gallons/hour. If it is located external to the fuel tank, the hL of the suction piping will be 2 feet and the static lift will be 0.5 foot. If it is located inside the tank there will be no suction piping. The fuel tank provides 1 foot of static head. The pressure drop across the fuel filter is 5 psi, maximum (when dirty) A pressure of 28 psig is required at the fuel nozzles. The change in elevation from the fuel tank (lowest level) to the fuel injection nozzles is 2.5 feet. Equivalent length of all tubing including bends and fittings can be assumed to be 20 feet. Pressure drop in tubing between fuel tank and injection nozzles should be less than 1 psi (excluding fuel filter)

2318_fuel pump in the system.jpg

Reference no: EM13865391

Questions Cloud

Could this constitute a violation of ethics : Elements on the periodic table can't be patented. Pharmaceutical companies therefore have little incentive to promote lithium or develop other uses for it, despite its potential." Could this constitute a violation of ethics
Prepare a process cost report for the mixing department : Using the FIFO costing method, prepare a process cost report for the Mixing Department
Identify technology facing leaders in accounting field today : Identify technology facing leaders in the accounting field today. Make two recommendations to mitigate the challenge and further develop organizational success.
Examine accounting principles and concepts used in businesse : Examine accounting principles and concepts used in businesses
Fuel pump in the system : 1. Where would you locate the fuel pump in the system so that the system will function correctly? 2.What size tubing would you specify from the pump to the engine?
Prepare journal entries for the roundtree transactions : Prepare journal entries for the Roundtree transactions and adjusting entries (round amounts to the nearest dollar). Compute the foreign exchange gain or loss to be reported on Roundtree's 2011 income statement.
What does customs border authority entail : What does Customs border authority entail? Border authority is only done so by ‘customs officers which include, officers of Bureau of Customs of the Treasury Department, commission warrant
Organic chemistry of thermochemical processing : Provide concise answers to the following questions about the organic chemistry of thermochemical processing: 1. List and indicate the structural formula for functional groups important to biomass chemistry.
Characteristics of soil horizons : Describe the components of soil, characteristics of soil horizons, as well as processes of soil formation and development. Explain soil properties, to include soil color, grain size, structure, and moisture

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Calculate the critical radius given values of -31 times 108

if ice homogeneously nucleates at -58.5oc calculate the critical radius given values of -3.1 times 108 jm3 and 25 times

  The exit conditions are 500 kpa 1000degc kinetic and

nitrogen gas is heated in a steady-state steady-flow process. the inlet conditions are 550 kpa 35degc and the exit

  What is difference between corrosion and stress corrosion

What is the difference between corrosion and stress corrosion cracking of pipelines? Which of them is more dangerous and why?

  The diffusion constant do and activation energy q of c in

the diffusion constant do and activation energy q of c in bcc fe is 0.01 cm2sec and 80kjmol respectively. in fcc fe the

  Determine a the final temperature in farenheit and final

a piston-cylinder assembly contains carbon monoxide modeled as an ideal gas with constant specific heat ratio k 1.4.

  Two points b and c lie on radial line of a rotating disk

two points b and c lie on radial line of a rotating disk. the points are 2 inches apart. vb700 ftmin and vc880ftmin.

  The pump and prime mover isentropic efficiencies are 650

a solar-powered rankine cycle power plant uses 18.5 x 103 m2 of solar collectors. refrigerant-22 is used as the working

  Air enters a compressor at 300 k and 100 kpa at a

air enters a compressor at 300 k and 100 kpa at a volumetric flow rate of 4 m3s. the air is compressed such that the

  Made of plastic with a maximum working stress

A camera case shown on the right is made of plastic with a maximum working stress of 1000 psi. What thickness of material should be used to create the case if the case will be used at 150 feet of depth in sea water?

  The coeficient of discharge is 097 calculate the rate of

a ventuti meter installed in a horizantal water main of diameter 150mm has athroat diameter of75mm. the coeficient of

  A spherical copper shell of inside radius 5cm and wall

a spherical copper shell of inside radius 5cm and wall thickness 1cm loses heat to the surrounding air which is

  How much money must be deposited to the fund

Principles of Engineering Economic Analysis-Time value of money-use of gradient factor is expected

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd