For water at room temperature

Assignment Help Mechanical Engineering

Reference no: EM13720686

For flow of viscous fluids through a 5 cm diameter pipe, for what flow rate in m3/h would we expect transition to turbulence?

a) For SAE 10W oil (use Appendix B for properties) at 20°C

b) For SAE 10W oil at 100°C

c) For water at room temperature?

d) For air at room temperature?

Reference no: EM13720686

Questions Cloud

Assume that the charge cooler incoming cooling water : Assume that the charge cooler incoming cooling water is at 45 oC and its effectiveness is 80% and the air pressure loss in charge cooler is 10 kN/m2, calculate the air temperature and density at the outlet of the charge cooler. Estimate the % increas..

Standard refrigerator and a window air conditioner problem : A kitchen contains a standard refrigerator and a window air conditioner. The refrigerator operates at steady state using 200 W of electric power and a COP of 3. If the kitchen is well insulated:

Calculate the compressor outlet temperature : If the isentropic efficiency of the compressor is 72% and the pressure ratio is 2.2:1, for an inlet pressure and temperature of 1 bar and 25oC, calculate the compressor outlet temperature, the compressor outlet density and the power required to drive..

Describe a physically-plausible situation : Describe a physically-plausible situation where the Reynolds number is (a) 1 (b) 10,000 (c) 1,000,000. For flow in tubes/pipes/ducts, use Red For flow over/along long/blunt objects, use Rel.

For water at room temperature : For flow of viscous fluids through a 5 cm diameter pipe, for what flow rate in m3/h would we expect transition to turbulence?

What will be the velocity and flow rate for the model : A dam spillway is tested with a 1/30th scale model, matching the Froude number. The flow over the dam has an average velocity of 0.6 m/s and a volume flow rate of 0.08 m^3/s.

What pressure should the air in the wind tunnel : A model of an airplane is to be tested at 20°C in a wind tunnel. The model is built to 1/12th scale. In order to match both the Mach number and the Reynolds number of the plane, the wind tunnel is pressurized. To what pressure (in atm) should the air..

Determine the overall heat transfer coefficient U : A deep freezer for hazardous chemicals is to be maintained at -20oF to insure a safe environment for the chemicals. The freezer is in a room that is kept at 60oF, and the inner and outer walls of the freezer are made of 26-gauge (0.0184-in) steel.

Determine the K-values from a DePriester chart : A stream containing 57 mol % n-Octane and the remainder Ethylene is to be separated by flash distillation. The molar flow rate of the stream is 823 mol/hr. The temperature and pressure of the stream entering the flash drum are 105°C and 325 kPa. De..

User Account

All Pages