Find the volumetric displacement

Assignment Help Mechanical Engineering

Reference no: EM13717613

An axial piston pump has nine 1/2in diameter pistons arranged on a 5in diameter piston circle. The offset angle is 8.3 degrees and pump speed is 3000rpm. Find the volumetric displacement. Please show ALL work.

Reference no: EM13717613

Questions Cloud

Compare the energy needed and waste produced by two methods : You can produce a parking token by two alternative methods. First, cut a 10 mm diameter billet to a length of 10 mm, and then closed-die forge it to the final size and shape (25 mm diameter). Second, you could start with a sheet of material, and stam..

Find the torque delivered by motor assuming : A hydraulic motor receives a flow rate of 10gpm at a pressure of 1000psi. if the motor speed is 500 rpm, find the torque delivered by motor assuming it is 100% efficient.

Calculate the heat-rejection temperature : An internally reversible heat engine has a thermal efficiency of 60 percent, with 600 kJ/cycle of heat transfer added at a temperature of 447 C. Calculate the heat-rejection temperature, in degrees Celsius, and the heat transfer rejected, in kJ/cycle..

Heat pump has heat-transfer addition : A heat pump has heat-transfer addition at 280 K and heat transfer out at 420 K, and the heat-transfer rate out at 420 K is 900 kJ/min. For each case below, determine from both the Clausis inequality and the Carnot principle for a heat pump whether th..

Find the volumetric displacement : An axial piston pump has nine 1/2in diameter pistons arranged on a 5in diameter piston circle. The offset angle is 8.3 degrees and pump speed is 3000rpm. Find the volumetric displacement. Please show ALL work.

Vibrometer has an undamped natural frequency : A vibrometer has an undamped natural frequency of 10Hz. and damped natural frequency of 8 Hz. Find the lowest frequency in the range to infinity at which the amplitude can be directly read from the vibrometer with less than 2 percent error.

Copper bulkhead at the entrance of a flow reactor : An 8" thick copper bulkhead (kept at 100 C by electrical heat) at the entrance of a flow reactor. The bulkhead is penetrated by a multitude of 0.25" diameter by 8" long cylindrical openings. The heated copper bulkhead is attached to 17" of excellent ..

Determine for the steam exiting the tank-mass flow rate : Three return steam lines in a chemical processing plant enter a collection tank operating at steady state at 1 bar. Steam enters inlet 1 with flow rate of 0.8 kg/s at 200 C. Steam enters inlet 3 with flow rate of 1.2 kg/s at 95 C. Steam exits the tan..

Find the final pressure and volume : Ammonia at 10ºC and mass 10 kg is in a piston cylinder with an initial volume of 1 m3. The piston initially resting on the stops has a mass such that a pressure of 900 kPa will float it. Now the ammonia is slowly heated to 50ºC. Find the final pressu..

User Account

All Pages