Find the voltage and power at the sending end

Assignment Help Electrical Engineering
Reference no: EM131088416

A 345-kV three-phase line is 130 km long. The resistance per phase is 0.036W per km and the inductance per phase is 0.8 mH per km. The shunt capacitance is 0.0112 m F per km. The receiving end load is 270 MVA with 0.8 power factor lagging at 325 kV. Use the medium line model to find the voltage and power at the sending end and the voltage regulation.

Reference no: EM131088416

Questions Cloud

Unconventional oil and natural gas production : What is the resource triangle and how does it relate to the revolution in unconventional oil and natural gas production?
Consequences of bilingualism on information processing : Recent research has shown that bilingualism shapes the human mind. What are some of the short-term and/or long-term consequences of bilingualism on information processing?
Current slide in oil prices : Discuss the similarities between the 1986 crude oil price collapse and the current slide in oil prices that began late 2014.
Basis of cheap oil : Describe some of the investments made on the basis of cheap oil that complicates the transition away from a hydrocarbon based society.
Find the voltage and power at the sending end : The shunt capacitance is 0.0112 m F per km. The receiving end load is 270 MVA with 0.8 power factor lagging at 325 kV. Use the medium line model to find the voltage and power at the sending end and the voltage regulation.
What examples illustrate about nature of standard deviation : Think of examples of measurements of a single variable. Think of one example for which the standard deviation is likely to be much higher for one group and much lower for another group on the same variable. What do your examples illustrate about t..
Technological advancement and structural unemployment : If so, is this behavior a natural consequence of technological advancement and structural unemployment? If not, is Corporate America operating under the principle of "Profit Maximization"?
Maintain competitive markets and discourage : What do we call government regulation intended to maintain competitive markets and discourage unfair accumulation of market power?
Shortage in the market for product when : There is a shortage in the market for a product when.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Develop a full swot analysis of ford

Take the perspective of Ford's Director of Strategic Planning to develop a full SWOT analysis of Ford, identifying and explaining at least five factors for each category (strengths, weaknesses, opportunities and threats) and propose a complete str..

  What is speedup in throughput for each of these improvements

Increasing the number of SIMD processors to 15 (assume this change doesn't affect any other performance metrics and that the code scales to the additional processors)

  Calculate the number of conductor needed for vout at no load

A four-pole dc generator has magnetic flux of 0.06 Wb/pole, a rotational speed of 1800 rpm, full load current of 40 A, and is simplex lap wound. The generator efficiency is 91%. Pole face coverage is 78%.

  Design the logic to control the temperature in a green house

design the logic to control the temperature in a green house. the temperature between 72 degrees and 80 degrees if the tem is below 72 degrees, a heater must be activated if the tem is above 80 degrees a cooler must be started.

  Calculate the voltage gain of the second stage-av2

two identical CE amplifiers are connected in cascade. The first stage is fed with a source eVsig having a resistance Rsig= 10k ohms. A load resistance Rl=10K ohms and is connected to the collector of the 2nd stage.

  What is the time response

What is the time response

  What is the positive frequency in hz of the null bandwidth

The discrete-time signal x[n] is actually the result of sampling a periodic continuous signal x(t). The signal x[n] is 1 from -12 to +12, zero from n = 13 to 87 and then it repeats. What is the positive frequency (in hz) of the Null Bandwidth

  What is max quantization error that can expected from meter

A DC voltmeter is rated at 14 bits of resolution and has a full-scale input range of ±5V. Assuming the meter's ADC is ideal, what is the maximum quantization error that we can expect from the meter.

  Show that the magnitude spectrum is an even function

Let Xa (jΩ) denote the Continous Time FourierTransform of a real-valued continuous time functionxa(t). Show that the magnitude spectrum | Xa(jΩ) | is an even function of Ω and the phase spectrumθ(Ω) = arg{Xa (jΩ)} is an odd function ofΩ.

  Calculate the armature voltage to be applied in steady state

Plot the steady state torque-speed characteristic for Va = 100V, 60V, and 30V. Calculate the armature voltage to be applied in the steady state at the speed of 1500 rpm when the motor torque load require is 3 Nm.

  Find a possible series rl circuit equivalent to n

With V=100V, the instantaneous power into a network N has a maximum value 1500 W and a minimum value ?247 W. (1) Find a possible series RL circuit equivalent to N. (2) Find S=P+jQ into N.

  Bjt amplifier design

The design of the amplifier shall be performed for the Fairchild Q2N3904 NPN Transistor. Specifications can be obtained from the datasheet for the Fairchild Q2N3904 and are typically given in a variety of ways. Minimum and maximum operating condit..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd