Find the temperature distribution-throughout the chip

Assignment Help Mechanical Engineering

Reference no: EM13703090

A computer chip has dimensions 3 × 3 × 0.2 and a volumetric heat generation rate of 2.5 × 107/3. The bottom and side surfaces of the chip experience no heat loss, whereas the top surface is cooled by air convection, with = 310?? and = 300 /2 x . Find the temperature distribution,() throughout the chip.

Reference no: EM13703090

Questions Cloud

Determine the rate of heat rejection to the environment : A refrigerator uses a R-134a as the working fluid and operates on an ideal vapor-compression refrigeration cycle between 0.12 and 0.7 MPa. The mass flow rate of the refrigerant is 0.05 kg/s.

Work required to perform this operation on an ideal gas : Ten moles of ethylene (T_c=9.2 degrees C, P_c= 214.2kg/m^3) are to be compressed isothermally from their initial state (P = 21.7 bar,T = 25 ºC, and V = 1000 cm3/mol) to 100 cm3/mol. Estimate the work required to perform this operation on an ideal gas..

Determine the entropy change of the steam : A rigid tank contains 8 kg of saturated vapor steam at 115 degrees c. The steam is cooled to the ambient temperature of 20 degrees c. (a) Sketch the process with respect to the saturation lines on a T-v diagram. (b) Determine the entropy change of th..

Maximum energy of distortion theory of failure : A steel circular bar (\sigmayp =250 MPa) of d=60-mm diameter is acted upon by combined moments M and axial compressive loads P at its ends. Taking M=1.5KN.m, determine, based on the maximum energy of distortion theory of failure, the largest allowabl..

Find the temperature distribution-throughout the chip : A computer chip has dimensions 3 × 3 × 0.2 and a volumetric heat generation rate of 2.5 × 107/3. The bottom and side surfaces of the chip experience no heat loss, whereas the top surface is cooled by air convection, with = 310?? and = 300 /2 x . Find..

Calculate the work of the expanding gas : An electric motor is connected to a 12-V battery. The electric current to the motor is 3 A. 90 % of the electric energy from the battery is converted into mechanical work to mix an ideal gas in an adiabatic cylinder.

Find the axial pressure of the unit normal pressure : A multiple disc clutch employs 3 steel and 2 bronze discs having outer diameter 300 mm and inner diameter 200 mm. For a coefficient of friction of 0.22 find the axial pressure and the power transmitted at 750 r.pm if the normal until pressure is 0.13..

Screws and thread fasteners : How to decide which type of thread fasteners use for any design? what's the advantage and disadvantage?

Develop a variance analysis including a budget variance : Develop a variance analysis including a budget variance performance report and appropriate variances for materials, labor, and overhead.

User Account

All Pages