Find the surface temperature in f of the computer chip

Assignment Help Electrical Engineering

Reference no: EM13228076

For computer chip of 10mm (length), 10 mm(width) is operated by power of 0.345 watt, which surrounded by coolant material of temp of 70 F. The Internal energy rate is 3.5J/sec and kinetic energy rate is -4.5J/sec

Assuming PE energy is no changed.

Find the Surface Temperature in F of the computer chip during the convection heat transfer. (Hints:heat convection, Q= -hAdt, heat transfer coefficient , h=120 W/sq.m K, W=J/sec, Apply 1st law of Thermodynamics)

Reference no: EM13228076

Questions Cloud

Find the rms current into the motor : A 450 kW motor operating 73% Power factor lagging is connected to a 120V(rms), 60Hz line. (a) Sketch and label the power triangle for the motor. (b) Find the rms current into the motor.

Explain methyl red-hcl and ammonia : For each of these three possible indicators, give an example of an analyte and a titrant which best suits its use. changes color when the solution is slightly acidic (methyl red-HCl and ammonia?)

Explain sodium acetate and hydrocloric acid : In ploystyrene beaker , we mixed 30 mL of 0.1 M sodium acetate and 15 mL of 0.1 M hydrocloric acid. we measured the PH ( in PH meter ) it was 4.86 and then we added 5 mL of 0.1 M NaOH to this buffer.

Find the mass of the saturated liquid and of saturated vapor : the saturated liquid and vapor mixture at t=300c and quality of 75%.the mixture occupies a volume of 0.05 m^3 (a) find the specific volume in m^3/kg (hints: vf= 0.0014 vg=0.02167m^3/kg at t =300c) (b) find the mass of the mixture in kg.

Find the surface temperature in f of the computer chip : For computer chip of 10mm (length), 10 mm(width) is operated by power of 0.345 watt, which surrounded by coolant material of temp of 70 F. The Internal energy rate is 3.5J/sec and kinetic energy rate is -4.5J/sec.

Explain a buffer solution with a ph : A Buffer solution with a pH reading of 8.50 was prepared by mixing 0.25 mole acid(HA) and 0.05 mole NaOH in 500.0ml DI water.

What is the electrical input power in watts of the motor : A motor operated from a 480 V(rms), 60 Hz source has an output of 800 hp. The motor is 89% efficient and has a power factor of 69.5% lagging. What is the electrical input power in watts of the motor

Explain h2 to form ch3 oh at constant pressure : the enthalpy change is 25.8 KJ. How many grams of H2 gas are produced? and d: How many KJ of heat are released when 50.9 g of CO gas reacts completely with H2 to form CH3 OH at constant pressure?

Determine the total power consumed in the load : A three-phase load is Y-connected. The load has a phase voltage of 139 V and a phase current of 49 A. Each phase of the load consumes 5.1 kW of power. (A) Sketch and label the load. Find (b) the line voltage, (c) the line current, and

User Account

All Pages