Find the stress

Assignment Help Electrical Engineering
Reference no: EM13864560

1. Find the stress in both members shown below.

1700_Strength of Materials.jpg

2. What steel specifications (types of steel) are suitable for structural applications?

3. A round bar of AISI 1020 hot rolled, 1 inch in diameter and 20 inches long, is subjected to a tensile of load 10,000 lbs.  Compute its elongation due to the stress.

4. A 1-inch square bar of A242 steel is 12 inches long and subjected to impact loading in tension of 10,000 lb.  The elongation is limited to 0.3% of the total length.  Compute the maximum allowable load.

5. A short post is made by filling a standard 8 x 8 x 1/2 structural steel tube with concrete.  The steel has an allowable stress of 21,600 psi.  The concrete has a rated strength of 5,000 psi but, in this application is to be limited to 2000 psi.  See section 2-10 in your text for the modulus of elasticity for concrete.  Compute the allowable compressive load for the post. 

6. A drive shaft transmits 90 HP of power at 200 revolutions per minute.  The drive shaft is 2 in. diameter and has a 1/8 in. deep groove that has a radius of 1/16 in.  The groove has a 2 mm radius.  Compute the torsional stress in the drive shaft.

Reference no: EM13864560

Questions Cloud

Compute the companys return on investment for the period : Compute the company's return on investment (ROI) for the period using the ROI formula stated in terms of return on sales and investment turnover.
What are health claims : What are health claims and how many are currently approved? What requirements must be made before a health claim can be made on a food product?
Analyze why he responds to the particular environment : Choose one writer from our reading so far and analyze why he responds to the particular environment he writes about (for example, what exactly is White's interest in Timothy the tortoise? what exactly is it that punches Muir's buttons about the storm..
Methylene blue stain on potato : Methylene blue stain on potato  tube A - 100 degrees and gave a light blue colour tube b - 38-42 degrees and gave a deep blue colour
Find the stress : 1. Find the stress in both members shown below.
What is the city''s debt ceiling? what is the city''s credit : What is the city's debt ceiling? What is the city's credit rating? Would you consider purchasing municipal bonds from your city? Why or why not?
Discuss the law of retribution in inferno : Two pages essay assignment, double spaces- Topic: Discuss the Law of Retribution in Inferno (that is, the relationship between the sin and its consequences in the after-life)
Magnitude and point of application of a single : Problem 1: A metal plate is used to hold three 250kg blocks as shown. a) Determine the magnitude and point of application of a single force that is equivalent to the system of 3 blocks shown. b) the plate is supported by 3 vertical reaction forces..
Calculate the revenue for the year on a cash basis : Using the accural basis revenue on the income statement was $124,320. Accounts receivable were $3,320 on January 1 and $3,600 on December 31. Unearned revenue was $1,040 on January 1 and $1,690 on December 31. Calculate the revenue for the year on a ..

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine the magnitude of the resultant

A tow truck applies forces F1 and F2 to the bumper of an automobile where F1 is horizontal. Determine the magnitude of F2 that will provide a vertical resultant force, and determine the magnitude of this resultant.

  What is the voltage difference between the two plates

Two large flat charged plates are fixed parallel to one another in a large tank of distilled water (Er=81) with a total surface charge of 41.25×10-7 C on each plate (with opposite polarities). The plates are square, 4 m each side.

  Determine the minimum double-sided nyquist bandwidth

For a 64-PSK modulator with an input data rate(fb) equal to 36 Mbps and a carrier frequency of 100 MHz. A. Determine the minimum double-sided Nyquist bandwidth(fN) and the baud. B. Sketch the output spectrum.

  What is the conditional probability density of x given y

consider a communication channel corrupted by noise. let X bethe value of the transmitted signal and Y be the value of thereceived signal. assume that the conditional density of Y given(X=x) is Guassian, that is, fy/x(y/x)=1/√2πσ*σexp(-(y-x)squ..

  Plot the solutions obtained by using ode45 and dsolve

Apply the classical Runge-Kutta method to solve the following initial value problem given y(0)=1 and the step size h=0.1. Verify solution using MATLAB. Plot the solutions obtained by using ode45 and dsolve. Compare the graphs and provide an explan..

  Discuss ability to choose high or low speed on either floor

A customer has a 2 story house and needs a whole house fan to run on timers, 1 on each floor, the ability to choose high or low speed on either floor, and signal lights to show if in high or low speed on each floor. The diagram has 4 single pull s..

  What is the relationship between base and collector current

For an ideal Zener, is the Zener voltage is 15v and the power rating is 750mW, what is the maximum zener current allowed What is the relationship between base current and collector current called Show the equation relating IC IB and IE

  Find the output for the given input data

2) Draw the logic circuit for each of the following. For each gate, determine EVEN or ODD parity and find the  output for the given input data: a) 4-input XOR, input data=1001 b) 5-input XOR, input data-10010 c) 6-input XOR, input data=101001 d) 7-..

  Find the apparent power of an electric resistance heater

A capacitor, an electric resistance heater, and an impedance are connected in a parallel to a 120 volts, 60Hz system. the capacitor draws 50VARs, the heater draws 100 watts and the impedance coil draws 269 VA at a power factor. Find the Apparent P..

  Design a vending machine controller

Design a vending machine controller. The machines sells coke and pepsi. The cost is 25 cents, accepting dimes and nickels. When a dime is inserted the input D is asserted. When a nickel is inserted the input N is asserted.

  How does it take for light incident perpendicular to glass

A 5.00 cm thick layer of oil is sandwiched between 1.00 cm thick sheet of glass and a 2.00 cm thick sheet of polystyrene plastic. How long (in nano-seconds) does it take for light incident perpendicular to the glass to pass through this 8.00 cm th..

  Design a passive rc low pass filter with a cutoff frequency

Design a passive RC low pass filter with a cutoff frequency of 100Hz using a 4.7 uF capacitor. a) draw a schematic showing your filter while designating all component values and labeling the input and output voltage

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd