Find the root using the method of bisection

Assignment Help Electrical Engineering
Reference no: EM131420977

Task 1

YOU MUST ANSWER BOTH PARTS (a) and (b)

Bob and Carol are researching electrical pulse waveforms used in neural stimulation of brains of Alzheimer patients. Bob says that research shows that optimal stimulation can be achieved using a waveform modeled by the function

i = 0.017e0.24t

where i is the current (amps) and t is pulse time in seconds.

(a) Tabulate values for the function over a suitable short time period, then illustrate the shape of the mathematical curve using techniques with which you are familiar.

(b) Carol says the current in the pulse ramps from 0.017 amps to a maximum of 0.187 amps, but wonders what the mean current might be over this period. Calculate an estimate of the mean current for her, using a technique with which you are familiar.

Opportunities for Higher Grading

M1 To achieve MI for task 1b you need to demonstrate a mathematical solution with which you are familiar, which produces an exact value. This will require the use of calculus over and above geometrical techniques.

D2 In part (a) you need to show independence of thought in how you illustrate the function including step by step planning and explanation demonstrating organized strategies.

Task 2 YOU MUST ANSWER ALL PARTS (a) to (d)

Ted and Alice are attempting to work out the flow rate of water in a river. The average velocity of the water is found to be 2.05m/sec according to a flow meter, however, they do not know the cross-section of the river. To find this, they decide to measure the depth of the river from one side of the embankment to the other using intervals of 1.5m. Below are their results. They propose to use a numerical method to determine the approximate cross-sectional area of the river and multiply this by the velocity (above) and therefore obtain the flow rate in m3/sec.

Dist(m) 0 1.5 3 4.5 6 7.5 9 10.5 12 13.5 15
Depth(m) 0 1.04 1.65 3.1 4.66 4.12 3.21 2.33 1.78 0.76 0

Ted says they can approximate the cross-sectional area of the river using the Trapezium rule. Alice suggests using Simpsons rule as she says it is more accurate.

(a) Using the data in the table, use the Trapezium rule to approximate the cross section of the river, and thereby determine the approximate flow rate to 2 d.p).

(b) Repeat your calculation, but this time use Simpsons rule.

(c) Compare your two answers.

Ted bell eves the cross-section of the river can be modelled by the mathematical function

y = 0.036x2 (where y is the depth (m) at distance x (m))

Alice doesn't think Ted is correct and suggests using the mid-ordinate rule as a rough check to see if it calculates similar values to those In (a) and (p) above.

(d) Using the table below to help you, use a further mathematical technique with 5 strips, each of width 3m, to work out the cross-sectional area of the river based on the model y=0.036x2. Does the answer compare favourably with the approximations obtained in (a) and (b), Explain your conclusion.

Mid ordinate value (m) 0.036x
1.5
4.5
7.5
10.5
13.5

Task 3 YOU MUST ANSWER ALL PARTS (a) to (c)

Bob and arol are working on a problem in fluid mechanics. From experimentation they find that they can model the velocity flow, v (m/s), of a liquid along a channel using the following mathematical relationship

v3- 6v2 - 348v = -3112

Bob is to d that there should be a root of this equation between v = 10 and v = 11 m/s.

a) Re-arrange the equation and, using the interval above, find the root (to 3 decimal places) using the method of bisection.

(b) Carol knows a quicker way of doing this using the Newton-Raphson method. Using v=10 m/s as a first approximation, show how the Newton-Raphson method can be used to obtain the solution more quickly, and use it to check you answer in (a). Once again, obtain a solution to three decimal places.

(c) Use the Newton-Raphson procedure to find a root of the following equation to two decimal places, using r1 = -2 as a first approximation:

ex - 2x - 5 = 0

Verified Expert

In part a, the table for i,t is made and the graph is plotted. In part b, the mean value is found. D2 and M1 are completed.The values are found using Trapezium Rule, Simpsons Rule and mid-ordinate rule and results are compared. M2 is completed.The roots are found using Method of bisection, Newton Raphson method and results are compared.

Reference no: EM131420977

Questions Cloud

Discuss the appropriateness of government official being lie : Discuss the appropriateness of a government official being able to lie to the public. Explain when, if ever, is it permissible for a government official to stretch the truth.
Discuss the function that the hris serves : Propose a type of HRIS for the organization in the scenario. Discuss the function that the HRIS serves, and identify how that system will solve the business issue
Compute the annualized simple interest rate : Compute the equivalent annualized rate compounded (1) annually, (2) semiannually, (3) quarterly, (4) monthly, and (5) continuously.
Weight on the smaller planet : There are two planets. The larger planet has a radius four times as large as the smaller planet, but is only one-half as massive as the smaller planet. How would your weight on the larger planet compare to your weight on the smaller planet? Choose..
Find the root using the method of bisection : Demonstrate a mathematical solution with which you are familiar, which produces an exact value. This will require the use of calculus over and above geometrical techniques.
What is the period of these waves : A water wave has a frequency of 6 Hz and a wavelength of 3 m. a) What is the period of these waves? b) What is the wave velocity?
Center of a nonconducting sphere : A 5 nC point charge is embedded at the center of a nonconducting sphere (radius = 2 cm) which has a charge of -8 nC distributed uniformly throughout its volume.
Explain concept of social security as originally envisioned : Explain the concept of Social Security as originally envisioned by President Roosevelt. Evaluate the viability of Social Security within the next 20-30 years.
Determining the second coaxial surface : Charge of uniform density (20 nC/m2) is distributed over a cylindrical surface (radius = 1 cm), and a second coaxial surface (radius = 3 cm)

Reviews

inf1420977

3/20/2017 4:19:11 AM

I would simply like you to pass along how satisfied I am with the assignment. If it's not too much trouble let the expert know that they made an extraordinary showing with regards to.

inf1420977

3/20/2017 4:19:05 AM

Just tell tutor do what the question required. & The teacher wants long answers the answer should not be small. My university teacher doesn't want small answer. so - please write the answer in more detail the opportunity merit & distinction...So please do it acorindlyg & send it as soon as possible. 21629660_1IMG-20170311-WA0001.jpg 21629660_2IMG-20170311-WA0000.jpg

inf1420977

3/20/2017 4:15:44 AM

HND electronic engineering Assignment #2 please hire a professional tutor. Please follow all the assignment details carefully & don't miss anything. The student doesn't have one more chance to submit his assignment so please send the assignment perfectly this is assignment 2 plz need to be done on Microsoft word.. the question of assignment

len1420977

3/9/2017 5:36:59 AM

Opportunities for Higher Grading M2 In part (d) You must select and apply a further technique to determine the cross section of the river, with which you are familiar. You must show the formula used and ALL working. You should make a comprehensive comparison of the answer with those obtained earlier, and explain which solution is likely to be the closest to the true cross section

len1420977

3/9/2017 5:36:40 AM

(a) Cow, I tabulation and plot on graph paper, neat and appropriately scaled (b) Correct average waveform determined using correct method with calculations clearly shown (a) Trapezium rule used on the data in the table to approximate the cross section of the river, and thereby determine the approximate flow rate to 2 d.p. (b) Repeated using Simpson's rule (c) Sensible comparison between the two answers for (a) and (b) (d) Answer possibly using mid•ordinate rule(or similar) based on the mathematical function followed by a comparison of the result with (a) and (b) above (a) The equation re-arranged and the root determined correctly (to 3 decimal places) using the method of bisection. (b) Correctly repeated (a) using the Newton-Raphson method to obtain the solution more quickly (also to 3 decimal places), and answer in (a) compared. (c) Used the Newton-Raphson procedure to find a root of the given equation to two decimal places.

Write a Review

Electrical Engineering Questions & Answers

  Lithium ion battery technology

The paper includes Lithium ion battery technology with its advantages and disadvantages. The paper discusses about the Lithium air battery in which detailed reactions of Lithium with air including nonaqueous as well as aqueous are given.

  Power transformers and tariffs

Construction of different types of power transformer, significant energy savings

  Paper on orthogonal frequency-division multiplexing

This document is shown a paper on Orthogonal frequency-division multiplexing with advantages, disadvantages and uses.

  Function of the hmi in a scada system

This assignment contains electronics engineering questions like State the commonly found components of a SCADA (Supervisory control and data acquisition) system. and decribe the function of the HMI in a SCADA system.

  Resultant waveform of the odd harmonic series

Prepare an Excel graph showing the individual components and summated resultant waveform of the odd harmonic series resulting in an approximate square wave.

  Explain scada system

Explain the function of the HMI in a SCADA system.

  Design a 2-digit 24 second shot-clock

Design a 2-digit 24 second "shot-clock" countdown timer with pushbutton controller.

  Model a discrete-time system

To understand di erent signal models To be able to model a discrete-time system and design simple signal processing algorithms.

  Draw a relay construction diagram

Draw a relay construction diagram and briefly explain the operation of a relay.

  Frequency division multiplexing

Write a short technical report on Frequency Division Multiplexing

  Impact of electron energy

Briefly discuss the impact of electron energy, electron current and target on the Bremsstrahlung generated.

  Traffic light controller

The schematic of the traffic light controller

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd