Find the required diameter for single barrel culvert

Assignment Help Civil Engineering
Reference no: EM13320078

A concrete culvert is required to convey a design flow of 654 cfs over a length of 330 ft, and a slope of .015ft/ft. Because there is a large lake downstream, the tailwater elevation is constant at 536.3 ft MSL, which will submerge the culvert outlet. The headwater elevation cannot exceed 544.4 ft MSL, without overtopping the roadway embankment. Find the required diameter for (a) a single barrel culvert and (b) twin barrels assuming a square edged entrance.

Reference no: EM13320078

Questions Cloud

The relationship among interest rates : What does all this tell you about the relationship among interest rates, time and future sums? (Round to one decimal place)
What is the annualized cost of system in dollars per year : An emission control system for a new car costs $750 and reduces NOx emissions from 0.4 g/mile to 0.18 g/mile. Assume the car is driven 10000 miles per year, and the life of the emissions control system is 11 years
How many radians does the cylinder rotate : A solid cylinder of mass 10 kg is pivoted about a frictionless axis thought the center O. How many radians does the cylinder rotate through in the first 5.0 seconds, if it starts from rest
Explain the two beakers contain the same compound : Say you are presented with two beakers, beaker A and beaker B, each containing a white, powdery compound. a. From your initial observations, you suspect that the two beakers contain the same compound.
Find the required diameter for single barrel culvert : The headwater elevation cannot exceed 544.4 ft MSL, without overtopping the roadway embankment. Find the required diameter for (a) a single barrel culvert and (b) twin barrels assuming a square edged entrance.
How long is the angular velocity of the wheel : A wheel that is rotating at 45 Rad/s is give an angular acceleration of 3 Rad/s (sqrd). Use gravity: 10 m/s, how long is the angular velocity of the wheel
Against losses due to interest rate changes : You wish to hedge against losses due to interest rate changes by taking a position in 7 year discount bonds. What must the value of your position be?
Find the magnitude of the maximum magnetic force : A laboratory electromagnet produces a magnetic field of magnitude 1.54 T. Find the magnitude of the maximum magnetic force that could be exerted on the proton
Design a one way slab to support a uniform live load : Design a one way slab to support a uniform live load of 300 psf. The beam is simply supported with a span of 20 ft. Use a reinforcement ration ( Ps) of 0.008 Use f'c=3000 psi and fy=60000 psi.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the maximum bending moment of the beam

A 27ft beam has a uniform load of 6kip/ft. along its entire length. From left to right x=0ft to x=27ft. At x=0 ft it is pinned and at x=18 ft there is a roller. So, the 9 ft end section is cantilevered.

  Determine the pressure head at the top of the dome

A closed cylindrical tank filled with water has a hemispherical dome and is connected to an inverted piping system. The liquid in the top part of the piping system has a specific gravity of 0.68.

  Determine the x and y scalar components

The forces F1, F2, and F3, all of which act on point A of the bracket, arespecified in three different ways. Determine the x and y scalar components of each of the three forces.

  Determine the difference in the rate of grade

indicate the conditons by a sketchand determine the difference in the rate of grade at the intersection of each of the following paris of slops.

  Calculate the volume of gas produced

A 1-kg block of dry ice(solid CO2) becomes a gas at room temperature. calculate the volume of gas produced at 25 degrees celsius and 975 kPa.

  Determine water level rise in an unconfined aquifer produced

Determine the water level rise in an unconfined aquifer produced by a seasonal precipitation of four inches. The aquifers porosity is 20 percent and its specific retention is 9 percent.

  How to sketch the hgl and the egl for the system

What power must the pump supply to the system to pump the oil from the lower reservoir to the upper reservoir at a rate of .2 m^3/s. Sketch the HGL and the EGL for the system.

  Find the probability that more than 8 fail before 10 months

Suppose that under severe operation conditions, the lifetime, in months, of a transisitor is exponentially distributed with parameter d = 0.2. a. Find the probability that such a transistor lasts longer than 8 months.

  Estimate what is the total volume of runoff

It rains 3.0 in. on a 20.0 acre watershed. What is the volume of rainfall excess if 30% of the watershed area is a lake and infiltration on the soil is estimated at 1.0 in. What is the total volume of runoff

  Determine the largest mass-m which the frame can carry

The frame is desinged to carry the hanging mass at G equal to 167 kg. The frame is supported by a pin connection at C and the rope AB, and constructed with pin connections at points E, F, and D.

  Determine the velocity with a static pressure in pipe

Water with a static pressure of 1.96kN/M2 flows through an 800 mm diameter pipe. A pitot tube pressure gage in this pipe reads a pressure of 5.88 kN/M2. Determine the velocity (V)

  What is one unique fact that be learned about the 950 loader

A local rental yard said that they will supply you the loader for $50.00 per hour plus $4.15 sales tax not including any operating costs. You need to analyze what it would cost your company to purchase the loader instead of renting it.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd