Find the power produced by the hydro turbine

Assignment Help Mechanical Engineering

Reference no: EM13702456

As shown in the sketch, water flows at 2550 kg/s from a very large reservoir through a penstock (pipe) to a hydro turbine. The water exits the turbine through a 0.5 m diameter pipe. The reservoir surface is 30m above the location where the water exits.

(Hint: Assume steady flow and reservoir area is very large compared to the water exit area). Density of water = 997 kg/m3.

a. Assuming no head loss, find the power produced by the hydro turbine.

b. What will be the power output, if total head loss is 3m?

Reference no: EM13702456

Questions Cloud

Heat transfer coefficient between the coffee and the wetted : Hot coffee of temperature T[infinity] = 90°C is poured into a cup whose wall is initially at the temperature Ti= 10°C. The porcelain wall of the cup is 0.5 cm thick. The heat transfer coefficient between the coffee and the wetted surface is h= 700 W/..

Research paper proposal : As you are exploring different ideas for your paper, note the research paper will require you to submit 8-10 double-spaced, typed pages regarding a topic identified in the textbook or another topic relative to this course.

Research paper: the role of the system analyst : Research Paper: the role of the system analyst and how it impact goals and objective of the organization. This paper should a 10 page paper including references and content. It be written in an APA format.

Estimate the speed of the plane-assuming incompressible flow : An airplane flies at an elevation of 20,000 ft, where the atmospheric pressure is 45 kPa and the temperature is -24 °C. A pitot-static tube mounted on the plane in the free-stream gives a differential manometer reading equivalent to 8.5 inches of H2O..

Find the power produced by the hydro turbine : As shown in the sketch, water flows at 2550 kg/s from a very large reservoir through a penstock (pipe) to a hydro turbine. The water exits the turbine through a 0.5 m diameter pipe. The reservoir surface is 30m above the location where the water exit..

Steel plane of finite dimension and thickness : A steel plane of finite dimension and thickness of 13 mm has the initial (uniform) temperature of 35 C. put the plane into the solution in all sudden and the wall temperature is increased to 146 C spontaneously. The thermo diffusivity of the plane, i..

Determine the bridge signal voltage : Determine the value of Rw required to null the bridge when the applied weight on the scale is zero kg and Determine the bridge signal voltage ΔV when the applied weight onthe bridge is 999 kg

Determine mud height at which blocks will overcome friction : Mud is stopped using a wall made from 1.2 m high x 0.25 m wide rectangular concrete blocks as shown in figure below. Blocks density is 2700 kg/m3, mud density is 1800 kg/m3, and friction coefficient between ground and concrete blocks is f = 0.3.

The role of the system analyst and how it impact goals : Research Paper: the role of the system analyst and how it impact goals and objective of the organization. This paper should a 10 page paper including references and content. It be written in an APA format.

User Account

All Pages