Find the power factor for an rc circuit

Reference no: EM13318120

Find the power factor for an RC circuit connected to a 70.0Hz generator with an rms voltage of 155 V. The values of R and C in this circuit are 115%u03A9 and 79.4%u03BCF, respectively.

Reference no: EM13318120

Questions Cloud

What is the average power consumed by this circuit : An ac generator with a frequency of 1.44 kilohertz and an rms voltage of 24.2 volts is connected in series with a 1.90 kilo-ohms resistor and a 330 mega hertz inductor. What is the average power consumed by this circuit

Find the average power consumed by this circuit : A generator with an rms voltage of 15\30V is connected in series to a resistor 3.25 kilo-ohm and a capacitor 3.50 microfarad. Using the frequency found in part A, find the average power consumed by this circuit

At what rate must heat be supplied to the power plant : At a coal-burning power plant a steam turbine is operated with a power output of 548 MW. At what rate must heat be supplied to the power plant by burning coal

Explain the relevant facts and decision of the court : Identify if this is a civil or criminal dispute and explain the relevant facts and decision of the court - Identify which key pieces of legislation did the court examine in arriving at its decision. Further, outline the process by which legislation..

Find the power factor for an rc circuit : Find the power factor for an RC circuit connected to a 70.0Hz generator with an rms voltage of 155 V

Determine the minimum elevation difference across channel : A 2 m diameter semicircular channel made of brickwork is to transport water to a distance of 1.7 km uniformly. If the flow rate is to reach 200 m3/min when the channel is full, determine the minimum elevation difference across the channel.

What is the distance of the two particles : What is the distance of closest approach of the two particles? (Assume that the gold nucleus remains stationary

At what load would you expect the specimen to fracture : Three-point bending test was performed on an aluminum oxide specimen having a circular cross section of radius 5.5 mm; the specimen fractured at a load of 850 N when the distance between the support points was 50 mm.

Determine the angular velocity of the door : A 10 g bullet traveling at 440m/s strikes a 7.0kg , 1.2-m-wide door at the edge opposite the hinge. What is the angular velocity of the door just after impact

User Account

All Pages