Find the net gain or loss in storage and compute the volume

Reference no: EM13559328

A mean draft of 380,000 m^3/day is produced from a drainage area of 330 km^2. At the flow line, the reservoir is estimated to cover about 1600 hectares. The annual rainfall is 96.5 cm, the mean annual runoff is 22.8 cm, and the mean annual lake evaporation is 77.1 cm. Find the net gain or loss in storage and compute the volume of water evaporated in cm^3.

Reference no: EM13559328

Questions Cloud

Calculate the time needed for the following particles : Assume that the current cost for a 120-pupil school constructed of wood frame for a city is $1,800,000. We are asked to develop an order-of-magnitude estimate for a 90-pupil school ?

Estimate how much gasoline overflows from the tank : An automobile fuel tank is filled to the brim with 51.4 liters(13.7 gallon) of gasoline at 12.0oC. How much gasoline (in Liter) overflows fromthe tank as a result of the expansion

What is the range of water content if the relative : What is the range of water content if the relative compaction (R.C.) is required to be 95% of the standard proctor γdmax?

What is the depth of the water in the box : a hollow cubical box is 0.30m on an edge. This box is floatingin a lake with one-third of its height beneath the surface. What is the depth of the water in the box

Find the net gain or loss in storage and compute the volume : A mean draft of 380,000 m^3/day is produced from a drainage area of 330 km^2. At the flow line, the reservoir is estimated to cover about 1600 hectares. The annual rainfall is 96.5 cm, the mean annual runoff is 22.8 cm

What is the degree of saturation of the field sample : Let us pretend you are an earthwork construction control inspector and you are checking the field compaction of a layer of soil. After compaction in the field, the density of soil was checked by excavating part of the compacted soil; the volume of so..

Compute the saturated unit weight of the silt using basic : Compute and plot (or clearly sketch) the vertical effective stress distribution up to a depth of 34 ft of silt deposit before the lowering of the water table.

Determine the maximum tensil and compressive stresses in sec : The vertical portion of the press shown below consists of rectangle tube of wall thickness t=8mm. knowing that the press has been tightened on wooden planks being glues together until P = 20 kN, determine the maximum tensil and compressive stresses i..

What is the increase in the surface area of the cube : The length of each edge of an aluminum cube is 0.068 m. Thecube is heated to 152°C from 25°C. What is the increase in the surface area of the cube

User Account

All Pages