Find the maximum velocity of the locomotive

Assignment Help Mechanical Engineering
Reference no: EM13963900

A two cylinder uncoupled locomotive has inside cylinders 0.6 m apart. The radius of each crank is 300 mm and are at right angles. The revolving mass per cylinder is 250 kg and the reciprocating mass per cylinder is 300 kg.

The whole of the revolving mass and two-third of reciprocating masses are to be balanced and the balance masses are placed in the planes of rotation of the driving wheels at a radius of 0.8 m. The driving wheels are 2 m in diameter and 1.5 m apart.

If the speed of the engine is 80 kmph, find the hammer blow, maximum variation in tractive effort and maximum swaying couple. Find the maximum velocity of the locomotive if maximum allowable dead load on each wheel is limited to 40kN

Reference no: EM13963900

Questions Cloud

Calculate overall heat transfer coefficient : Calculate Overall heat transfer coefficient, Overall thermal resistance and the rate of heat transfer
Find reciprocating mass and relative angular position : Find the reciprocating mass and the relative angular position for each of the inner cranks, if the length of each crank is 350 mm, the length of each connecting rod 1.7 m and the engine speed is 500 rpm.
Calculate the least-squares regression line : (a) Calculate the least-squares regression line for these data. (b) Plot the points and the least-squares regression line on the same graph.
Calculate the least-squares regression line : Calculate the least-squares regression line for these data and discuss its  usefulness.
Find the maximum velocity of the locomotive : Find the hammer blow, maximum variation in tractive effort and maximum swaying couple. Find the maximum velocity of the locomotive if maximum allowable dead load on each wheel is limited to 40kN
Calculate the work done of a joule cycle. : Compute the efficiency of this cycle in terms of gamma and pressure ratio P1/P2, where P1 is the pressure at state 1 and P2 is the pressure at state 2.
Life insurance policies for eight persons : The following data give the annual incomes (in thousands of dollars) and amounts (in thousands of dollars) of life insurance policies for eight persons.
Find the magnitude of the net gravitational force exerted : Find the direction of the net gravitational force exerted on the spacecraft by the earth and moon. State the direction as an angle measured from a line connecting the earth and the spacecraft. (in degrees)
Shape of a square is charge of four particles on each corner : In the order of positive, negative, positive, negative. How much work in joules is required to set up the four charge configuration if q= 1.62pC, a= 77.1cm, and the particles are initially infinitely far apart and at rest?

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Then in another 4s it moves from sb to sc 25 m determine

a particle travels along a straight line such that in 2 s it moved from an initial position sa 0.5 m to a position sb

  A ball is dropped from a height of 10m bounces off the

1. a ball is dropped from a height of 1.0m bounces off the floor and is observed to rise up a maxium height of .8 m.

  Does the addition of the ice change the cable configuration

Determine the mass p of ice per meter which can form on the cable without the maximum allowable tension being exceeded. If additional stretch in the cable is neglected, does the addition of the ice change the cable configuration?

  Determine the total power dissipated from the disks

The paint on the rotating disk is worn off by dust in the air, exposing the base metal, which has an emissivity of s = 0.10. Determine the total power dissipated from the disks worn top surface.

  For a ballistic missile loaded with candy launched with the

for a ballistic missile loaded with candy launched with the following conditions burnout altitude 200km burnout

  Find the aproximate dimensions of a pin so that the

find the aproximate dimensions of a pin so that the bearing and tearout of the plate happen simotaniously menaing the

  Gravity dump with no pump to enhance the flow rate

Gasoline is unloaded from a tanker truck through a 4 inch diameter rough-surfaced hose. This is a "gravity dump" with no pump to enhance the flow rate. It is claimed that the 8800 gallon capacity truck can be unloaded in 28 minutes. Do you agree? Sup..

  Will the engineers decide to use the steel

Assume they test null hypothesis H0: versus H1: Will the engineers decide to use the steel if H0 is rejected? Will the engineers decide to use the steel if H0 is not rejected?

  Results with standard convection correlations

The  velocity of the airstream was measured using a thermistor- based anemometer, and thermocouples were used to determine the temperatures of the airstream and the test-plate.

  Determine the flow rate of stream and the thermal efficiency

an ideal rankine cycle produces 100 MW of power. If the steam enters the turbine at 100 bar and 500C and is condensed at 1 bar, determine the flow rate of stream and the thermal efficiency.

  Calculate the maximum energy

Calculate the maximum energy that a 3-MeV alpha particle can transfer to an electron in a single collision

  What is the required time at 675 degrees celsious to have

for an iron-carbon alloy of eutectoid composition 0.76 wt carbon what is the required time at 675 degrees celsious to

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd