Reference no: EM13868177
1. Bike comes in many forms, each aimed at a particular sector of the market such as
a. Sprint bikes
b. Mountain bikes
c. Children's bikes.
Use your judgement to identify the primary objective and the constraints that must be met for each of these
2. Use the modulus-density chart to find:
(a) the material with the highest density
(b) the metal with the lowest modulus
(c) the polymer with the highest density
(d) the approximate ratio of the modulus of woods measured parallel to the grain and perpendicular to the grain
(e) the approximate range of modulus of elastomers
3. Use the modulus-relative cost chart to find:
(a) the cheapest material with a modulus greater than 1 GPa
(b) the cheapest metal
(c) the cheapest polymer
(d) whether magnesium alloys are more or less expensive than aluminum alloys
(e) whether PEEK (a high performance engineering polymer) is more or less expensive than PTFE
4. Use the yield strength-density chart or the yield strength-modulus chart to find:
(a) the metal with the lowest strength
(b) the approximate range of strength of the composite GFRP
(c) whether there are any polymers that are stronger than wood measured parallel to the grain
(d) how the strength of GFRP compares with that of wood
(e) whether elastomers, that have moduli that are far lower than polymers, are also far lower in strength.
|
Glide to opposite edges of the rink
: Two ice skaters, with masses of 50.0kgand 85.0kg, are at the center of a 60.0m-diameter circular rink. The skaters push off against each other and glide to opposite edges of the rink.
|
|
Iconix brand group owns and markets various brands
: Based on the information given, determine the following for trademarks disposed of during 2013: (a) their cost, (b) their accumulated amortization at the time of disposal, and (c) the gain (loss) on disposal of trademarks.
|
|
Describe how nonrenewable resource was initially formed
: Describe how nonrenewable resource was initially formed.
|
|
The antimatter reactor fails
: A spaceship of mass 2.30×106kgis cruising at a speed of 4.70×106m/swhen the antimatter reactor fails, blowing the ship into three pieces. One section, having a mass of 5.10×105kg, is blown straight backward with a speed of 2.40×106m/s. A second piece..
|
|
Find the material with the highest density
: Bike comes in many forms, each aimed at a particular sector of the market such as Sprint bikes and Mountain bikes - Use your judgement to identify the primary objective and the constraints that must be met for each of these
|
|
Find the minimum x distance
: A uniform beam is supported by a cable at one end and force of friction at the other. Cable at least 30 degrees. Length of beam 6m. Friction is .86 and mass is 100kg. Find the minimum X distance we can add 250 kg and the beam not slip from the wall
|
|
Calculate the additional annual retirement contributions
: Calculate the additional annual retirement contributions
|
|
What is the current in the wire
: A 4.0 V potential difference is applied between the ends of a 0.70 mm -diameter, 75 cm -long nichrome wire.What is the current in the wire?
|
|
Move from rest through 90 degrees in 30 second
: A door has mass of 44,000 kg. A rotating inertia of 5.7 X 10^5 kg m^2 at the hinge. width is 3.1 m. Minimum force at the outer edge to make it move from rest through 90 degrees in 30 second.
|