Find the magnitude of the resulting acceleration

Reference no: EM13248105

A "sun yacht" is a spacecraft with a large sail that is pushed by sunlight. Although such a push is tiny in everyday circumstances, it can be large enough to send the spacecraft outward from the Sun on a cost-free but slow trip. Suppose that the spacecraft has a mass of 820 kg and receives a push of 15 N.

(a) What is the magnitude of the resulting acceleration? If the craft starts from rest,

(b) how far will it travel in 1 day and

Reference no: EM13248105

Questions Cloud

What are the values required for prescale pwmper : A PWM is to be programmed to output a signal with a pulse high width of 150 usec and a pulse low width of 250 usec. What are the values required for prescale (if any) PWMPER and PWMDTY An 8-bit configuration is used and the E-clock is 24 MHz.

Find the charge on each plate of the capacitors : There are two capacitors of capacitance 5.0uF and 8.0uF are connected in series. Find the equivalent capacitance of the network and the charge on each plate of the capacitors

Explain the cahn-ingold-prelog rules for prioritizing groups : When using the Cahn-Ingold-Prelog rules for prioritizing groups on a stereogenic carbon, priority is first assigned on the basis of

Find the emf of the battery of circuit : A circuit consists of a battery connected to three resistors (60ohm , 30ohm , and 180ohm ) in parallel. The total current through the resistors is 1.9A . Find the emf of the battery.

Find the magnitude of the resulting acceleration : A "sun yacht" is a spacecraft with a large sail that is pushed by sunlight. Although such a push is tiny in everyday circumstances, What is the magnitude of the resulting acceleration, If the craft starts from rest

How much does the boat move in meters : A group of people with total mass 1500 kg stands in a boat with mass 12,000 kg at rest in frictionless water. If the whole group walks 6.5 m from bow to stern, how much does the boat move in meters

Find the phase a current ia using fourier techniques : Assume that the load is star connected with the neutral disconnected. Each phase has a series RL load with R = 5 ohms and L = 20 mH. Plot the neutral voltage Plot the phase to neutral voltage for phase a.

Determine the amounts of energy transferred as heat : A sample of non-ideal gas is made to undergo an expansion process during which its pressure and volume are related as shown in the table below. The energy of the gas at the start and finish of the process is measured and found to be 5 and 3.2 Btu

Find the direction and magnitude of the energy transfer : A substance expands from V1 = 1 ft3 to V2 = 6 ft3 in a constant-pressure process at 100 lbf/in2. The initial and final internal energies are U1 = 40 Btu and U2 = 20 Btu, respectively.

User Account

All Pages