Find the magnetic flux density vector at an arbitrary point

Assignment Help Electrical Engineering
Reference no: EM13267431

A circular disk of radius a is uniformly charged over its surface by a charge of density . The disk uniformly rotates in air about its axis (perpendicular to the disk) with an angular velocity . Find the magnetic flux density vector at an arbitrary point along the axis of rotation. Assume that the charge distribution over the disk remains the same during the rotation.

Reference no: EM13267431

Questions Cloud

Find the angular position of third spectral line in hydrogen : The three principal visible spectral lines from hydrogen have wavelengths 434 nm, 486 nm, and 656 nm. Find the angular position of the third spectral line in hydrogen
Find the magnitude and angle of the line-to-neutral value : A 3-phase, 11 kV, round-rotor synchronous generator delivers power to an infinite bus whose line-to-line voltage is constant at 11 kV rms. The effective stator resistance and synchronous reactance per phase of the synchronous generator are respectiv..
Define liquid methane can obtained under the same conditions : Can SO2 be maintained a liquid under a pressure of 100atm at 0 C. Can liquid methane be obtained under the same conditions.
What does the term sustainable growth rate mean : What does the term Sustainable Growth Rate mean? Would the amounts you have calculated in parts b. to d. equal the Sustainable Growth Rate for the firm?
Find the magnetic flux density vector at an arbitrary point : The disk uniformly rotates in air about its axis (perpendicular to the disk) with an angular velocity . Find the magnetic flux density vector at an arbitrary point along the axis of rotation. Assume that the charge distribution over the disk remai..
What is the wavelength of that color : You're doing a double-slit experiment with two different colors. What's the wavelength of that color
Explain sodium or potassium chlorate : why is lithium chlorate be a more practical choice for the "chlorate candle" than either sodium or potassium chlorate
Design a miller integrator with a time constant : Design a Miller integrator with a time constant of 0.1 s and an input resistance of 100 k ohm. A dc voltage of -1 volt is applied at the input at time 0, at which moment vO = -10 V. How long does it take the output to reach 0 V to +10 V
Find speed of the alpha particle : Suppose a proton and an alpha particle each have kinetic energy 8.6MeV. Find speed of the alpha particle

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find the developed power and power lost in ra

A shunt dc motor has RA= .1 ohmn and VT = 440 V. For an output power of 50 hp, we have nm=1500 rpm and IA = 103 A. The field current remains constant for all parts of this problem.

  Determine what is the torque of the load

a three phase motor operates at 70% efficiency, out of a 60Hz 480V balanced system of voltages. the motor takes a line current of 70A at a lagging power factor 65%. if the motor is rotating at 3500 rpm, and neglecting fraction, what is the torque ..

  Calculate the total reactive power absorbed by the capacitor

A wattmeter connected into the line gives a reading of 2765W. If a capacitor have a reactance of 30ohms is connected in parallel with the motor. Calculate the total reactive power absorbed by the capacitor and motor.

  Identify type of timer a 9s12dg256 microcontroller possesses

Timing systems play an important role in the generation of timing and measurement within a microcontroller. Identify the type of timer a 9S12DG256 microcontroller possesses.

  Calculate hall voltage across the wire

An Aluminum wire with a square cross section 2mm on a side is carrying a current of 1.5amps. Aluminum has a resistivity of 2.69*10^-6 ohm-cm and an atomic volume of 10cc/mol. Assuming aluminum has three free electrons per atom

  Which has the zener shunt regulator as the last stage

First as the output stage use a Zener shunt regulator and then replace the Zener shunt regulator with an appropriate IC voltage regulator. Do the SPICE simulation of the whole circuit, which has the Zener shunt regulator as the last stage.

  Compute the power of the water exiting the penstock

A penstock is used to bring water from behind a dam into a turbine. the effective head is 20 m and the flow rate of water is 50m^3/s. Compute the power of the water exiting the penstock.

  Calculate the per unit resistance of this transformer

Efficiency in a power transformer is 98.6 percent when loaded such that its copper losses are five times its core losses. Calculate the per unit resistance of this transformer.

  Design a static cmos inverter with long channel transistors

Design a static CMOS inverter with long channel transistors and a. switching voltage VM of 0.6 VDD. What is the resulting ratio of WP/WN b. switching voltage VM of 0.45 VDD. What is the resulting ratio of WP/WN

  Convert the temperature range into an 8-bit digital word

Devise a system that will convert this temperature range into an 8-bit digital word with conversion from 00H to 01H at 200°C and from FEH to FFH at 350°C . An ADC is available with a 2.500-V internal reference. At 200°C a type K TC produces 8.13 m..

  Determine the load current and the load voltage

a. Determine the voltage regulation, the load resistance, the armature resistance, and the developed torque at full load. b. The speed of the generator is decreased to 1200 rpm, and the load resistance is unchanged.

  What total charge is contained within a cylinder of radius a

An electric flux density is given by D = D0 a, where D0 is a given constant. (a) What charge density generates this field (b) For the specified field, what total charge is contained within a cylinder of radius a and height b

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd