Find the machine synchronous reactance at 50 hz

Assignment Help Electrical Engineering
Reference no: EM13248186

A 6 pole round rotor 3 phase star connected synchronous machine has the following test results:
Open circuit test: 4000 V line to line at 1000 rev/min, 50 A rotor current
Short circuit test: 300 A at 500 rev/min, 50 A rotor current
Neglect the stator resistance and core losses, and assuming a linear open circuit characteristic, calculate:
(a) the machine synchronous reactance at 50 Hz,
(b) the rotor current required for the machine to operate as a motor at 0.8 power factor leading from a supply of 3.3 kV line to line with an output power of 1000 kW,
(c) the rotor current required for the machine to operate as a generator on an infinite bus of 3.3 kV line to line when delivering 1500 kVA at 0.8 power factor lagging,
(d) the load angle for (b) and (c), and sketch the phasor diagram for (b) and (c).

Reference no: EM13248186

Questions Cloud

What is the velocity of the mass : A 1248.0 g mass is on a horizontal surface with ?k = 0.36, and is in contact with a massless spring with a force constant of 790.0 N/m which is compressed, What is the velocity of the mass as it loses contact with the spring
What is the magnitude of the induced emf per phase in rotor : A three-phase induction motor operates at a slip of 3% and has a rotor copper loss of 300W. The rotational loss is 1500W. Determine (a) The air-gap power (b) The power output (c) If the rotor impedance is 0.2+j0.8 ohm/phase,
Determine the wheels angular velocity : A bicycle wheel is rotating at 40rpm when the cyclist begins to pedal harder, giving the wheel a constant angular acceleration of 0.45rad/s2, What is the wheel's angular velocity, in rpm, 10s later
Explain what is the effect on the products at equilibrium : according to le chateliers principle, what is the effect on the products when N2 is added to the equilibrium mixture of each of the following reactions? a)2NH3(g) 3H2(g)+N2(g). b)N2(g)+O2(g) 2NO(g). c)2NO2(g) N2(g)+2O2(g). d)4NH3(g)+3O2(g) 2N2(g)+..
Find the machine synchronous reactance at 50 hz : A 6 pole round rotor 3 phase star connected synchronous machine has the following test results: Open circuit test: 4000 V line to line at 1000 rev/min, 50 A rotor current Short circuit test: 300 A at 500 rev/min, 50 A rotor current
Determine the optimal order quantity : Average demand for one item is 40 units per day, and the standard deviation of demand is 3 units per day. Determine the optimal order quantity when there are 42 units of inventory on hand at the time of ordering.
How many rooms the inn should overbook per night : The number of no-shows is an approximated normal distribution with a mean of 1 and a standard deviation of 1. How many rooms the inn should overbook per night?
Explain the equilibrium constant for the reaction : The equilibrium constant for the following reaction is .20 at 100 degrees C. if an equilibrium mixture contains solid carbon, [H2O]=.40 M, and [CO]=.40 M,what is the [H2]? C(s)+H2O(g) CO(g)+H2(g)
Which green strategy makes the most sense for p&g : Can established competitors be beaten at their own game? (In other words, should P&G be confident in its ability to compete in the green markets?)

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine the impulse response fpr the filter

Find the impulse response fpr the filter? How many nonzero terms does the impulse response contain?

  Find the voltage gain realized

A transconductance amplifier with Ri = 2 kΩ, Gm = 40 mA/V , and Ro = 20kΩ is fed with a voltage source having a source resistance of 2kΩ and is loaded with a 1kΩ resistance. Find the voltage gain realized (from the source internal voltage to the o..

  Determine the expression for inductor voltage vl for t

A 10 uH inductor is connected to a circuit such that prior to t = 0 the current through the inductor is 10 mA. After t = 0 the current through the inductor is iL(t) = 10e^(-1000t) mA where t is time in seconds. a) Determine the expression for indu..

  Give knowledge of structure-property-processing-perfomance

Explain how to use the knowledge of Structure-Property-Processing-Perfomance relationship to improve on a device based on semiconductivity. Name the device, describe how it is made, the principle guiding its function and application.

  What is the eight-hex-digit address of the last byte

For each add instruction in this problem, assume that EAX contains the given contents before the instruction is executed, and give the contents of EAX as well as the values of the CF, OF, SF, and ZF flags after the instruction is executed.

  Build a home security system circuit

Build a home security system circuit using this program. The system must include a door sensor,window sensor, smoke detector, water leak sensor, a motion detector.

  Indicate the complex size of each frequency component

Sketch the spectrum of this signal indicating the complex size of each frequency component. You do not have to make separate plots for real/imaginary parts or magnitude/phase. Just indicate the complex phasor value at the appropriate frequency.

  What minimum wattage rating can be used for each resistor

g. What happened to all the power delivered to the resistors h. If the resistors are available with wattage ratings of 1/2 W, 1 W, 2 W, and 5 W, what minimum wattage rating can be used for each resistor

  Explain combinational versus sequential circuits

(Combinational versus Sequential Circuits) Which of the fol¬lowing contain circuits that are likely to be combinational and which contain sequential circuits? Explain your rationale.

  What is the maximum amount of zinc in zinc oxide

Zinc metal can be obtained from zinc oxide (ZnO), by reaction at high temperature with carbon monoxide (CO). ZnO(s) + CO(g) Zn(s) + CO2(g)The carbon monoxide is obtained from carbon.2C(s) + O2(g) 2CO(g)

  Explain an electric heater is connected to a constant

The Problem: An Electric Heater is connected to a constant 250-V source and absorbs 1000 W. Subsequently, this heater is connected to a constant 210 V source.

  Obtain input value from two switches on the logic designer

Design a circuit that, given a 2-bit value, will light a LED corresponding to that value. One of four LEDs should be lit for each of the four possible input values (binary 0 through 3).

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd