Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
The input to a filter is a discrete-time, zero-mean, random process whose autocorrelation function is
for some constant such that We wish to filter this process so that the output of the filter is white. That is, we want the output, to have an autocorrelation function,
(a) Find the transfer function of the filter. You may express your answer in terms of either a DTFT or a z-transform.
(b) Find the impulse response of the filter. For both parts, make sure your answer results in a causal filter.
We wish to implement the Johnson counter as a Moore machine using three (3) D flip-flops. Give the simplified excitation equations for each of the flip-flops, and draw the circuit. There is no input in this system, as the counter advances on every..
Adding dopants to a sample of silicon is found to reduce the Hall coefficient by a factor of 10 and increase the conductivity by a factor of 5. What effect has this dopant addition had on the mean free path
Derive the voltage measured by the voltmeter - Determine the minimum value of Rm required to ensure that the measurement error is smaller than 1 percent of vmi.
At 0°C the circuit is balanced and at this temperature the RTD has a resistance of 200 W. Determine the change in output voltage for a 1°C change in temperature now assuming the meter has an internal impedance of 8,000 W.
Find the electric field intensity at (0,0,75000) produced by 50,000 0.1 C charges along the x-axis spaced at 1 meter apart starting at (1,0,0) and 50,000 0.2 C chargers along the y-axis spaced at 1 meter apart starting at (0,1,0).
a- The adjustability of the potentiometer can be used to obtain an adjustable output voltage b- Both power supplies must be used so that the adjustable voltage can have both positive and negative values
The transducer has a 2000 lb capacity, a 2 mV/V rating and an excitation voltage of 10V. An estimate of the maximum force is 1200 lbs. Determine an appropriate input voltage settings for DAQ.
The transform of the Gaussian pulse g(t) = exp(-πt2) is exp(-π f2). Find thetransform of the modified pulse g(t)= exp(-100πt2). b) Find the bandwidths of the original and modifiedpulses using G(fBW)= .707 G(0). (Hint you have to usethe natural log..
A 2.5 meter long elastic cord is fixed at both ends. a) If the cord is vibrated at a frequency of 35-Hz, a n=3 standing wave is produced. with what speed do waves travel across the cord.
Under steady operating conditions, cold water at 15 oC and 200 kPa enters the water heater with a flow rate of 54 kg/min and leaves the water heater at 80 oC and 200 kPa. During its operation the water heater loses heat to its surroundings at the ..
Silicon has an absorption co-efficient of 850 cm-1 at a wavelength of 805 nm. Light of intensity 1 W/m2 at this wavelength is directed at normal incidence onto a polished silicon wafer of thickness 0.5 mm.a. Assuming a top surface reflectance of 30..
Calculate the reactive power consumed or supplied by this load. Does the load consume reactive power from the source or supply it to the source?
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd