Find the impedances of the approximate equivalent circuit

Assignment Help Electrical Engineering
Reference no: EM13999187

Q1) A Three phase line, which has an impedance of (2+j4) Ω per phase, feeds two balanced three-phase loads that are connected in parallel. One of the loads is Y-connected with an impedance of (30 + j40)Ω per phase, and the other is Δ-connected with an impedance of (60-j45) Ω per phase. The line is energized at the sending end from a 60-Hz, three phase, balanced voltage source of 120√3 V (rms, line-to-line). Determine:-

a. The current, real power and reactive power delivered by the sending end source.

b. The line-to-line Voltage at the load.

c. The current per-phase on each load.

d. The total three-phase real and reactive powers absorbed by each load.

Q2) The equivalent circuit impedances of a 20-kVA, 8000/240 V, 60-Hz transformer are to be determined. The open-circuit test and the short-circuit test were Performed on the primary side of the transformer, and the following data were taken:

Open-circuit test

Short-circuit test

(on primary)

(on primary)

IOC = 0.214A

Vsc = 489V

POC = 400W

Psc = 240W

Find the impedances of the approximate equivalent circuit referred to the primary side, and referred to the secondary side and sketch that circuit.

Also find the power factor of the Open-circuit test and the power factor of the Short-circuit test.

Q3) A simple power system is shown in the Figure below. This system contains a 480-V generator connected to an ideal 1:10 step-up transformer, a transmission line, an ideal 20:1 step-down transformer and a load. The impedance of the transmission line is (20 + j60)Ω, and the impedance of the load is 10 L 30 Ω. The base values for this system are chosen to be 480V and 10kVA at the generator side.

1435_Simple power system.jpg

1. Find the base voltage, current, impedance, and apparent power at every point in the power system.

2. Convert this system to its per-unit equivalent circuit.

3. Find the power supplied to the load in this system.

4. Find the power lost in the transmission line.

Reference no: EM13999187

Questions Cloud

Autosomal recessive homogentisic acid oxidase : Autosomal recessive homogentisic acid oxidase deficiency results in
The unbound or free hormones that are : It is generally accepted that it is the unbound or free hormones that are?
Delete movies collection using aggregation pipeline approach : Delete movies collection and re-create it using the aggregation pipeline approach - Add attribute gender: male/female to each document in the actors collection
Find the change in the cars kinetic energy from the bottom : Energy Pretest A 1300-kg car drives up a hill that is 17.0 m high. Find the change in the car's kinetic energy from the bottom of the hill to the top of the hill.
Find the impedances of the approximate equivalent circuit : Find the impedances of the approximate equivalent circuit referred to the primary side, and referred to the secondary side and sketch that circuit - find the power factor of the Open-circuit test and the power factor of the Short-circuit test.
Describe your strongest style and your weakest style : Describe your strongest style(s) and your weakest style. Provide examples to illustrate how the strong styles characterize you (or, in the case of your weakest style, do not characterize you)
How might you benefit from changing your self-concept : What do you remember being told as a child that still influences your behavior today in a negative way? In a positive way? How might you benefit from changing your self-concept
What do you like about the auditing profession : What have you learned about being human in the last eleven weeks? More importantly, how will what you have learned impact your own life and the lives of those people around you?
Basics of pregnancy and normal childhood development : Why is it important for human service professionals to understand the basics of pregnancy and normal childhood development

Reviews

Write a Review

Electrical Engineering Questions & Answers

  List the state table for the sequential circuit

A sequential circuit with two D flip flops, two inputs x and y, and one output z is specified by the following next state and output equations: A(t + 1) = xy + x'B B(t + 1) = y'A' + yB

  How to determine the proper cable size

How to determine the proper Cable Size for Given Load (with Examples) ?

  Fiber optics circle draw ray inside the core by using

draw ray inside the core by using matlab draw 3 circles or four circles with different angles so every circle has

  What is the maximum current that can be drawn from battery

A battery has an internal resistance of 0.029-ohm and an emf of 9.00 V. What is the maximum current that can be drawn from the battery without the terminal voltage dropping below 8.60 V

  What is the magnitude and angle of the current flowing

Given a voltage of 100 volts with a phase angle of 0 degrees, applied across an impedance of 50 ohms at an angle of +30 degrees. This is an inductive impedance - not TOTALLY inductive, but more inductive than capacitive.

  Overall noise temperature of the receiver

Block diagram of the front end of a communication receiver. The noise characteristics of the critical receiver components and calculate and the overall noise temperature of the receiver

  Express the vector as a linear combination of the elements

A canonical base for H7 is {(0000001), (0000010), (0000100), (0001000), (0010000), (0100000), (1000000)}. Express the vector (1010111) as a linear combination of the elements of the canonical base.

  How many ram cell arrays are required to construct 2g chip

Assume that the largest decoder that can be used in an m x1RAM chip has 14 address inputs and that coincident decoding isemployed. In order to construct RAM chips that contain more one-bitwords than m, multiple RAM cell arrays

  What is the intensity at a spot that is 72 m away

Suppose that a public address system emits sound uniformly in all directions and that there are no reflections. The intensity at a location 26 m away from the sound source is 3.0 × 10-4 W/m2. What is the intensity at a spot that is 72 m away

  What are power factor improvement methods

What are Power Factor improvement Methods ? and what Their advantages & Disadvantages ?

  Determine power that each of the two bulbs will dissipate

An incandescent lightbulb rated at 60 W will dissipate 60 W as heat and light when connected across a 100-V ideal voltage source. A 100-W bulb will dissipate 100 W when connected across the same source.

  Calculate the signal to noise ratio given rms noise voltage

1. Given R = 50Kohm and C = 100nF what is the frequency of oscillation 2. Given a required frequency of oscillation of f = 10kHz and R = 8kohm, what should the value of C be Calculate the signal to noise ratio given RMS Noise Voltage = 20mV and RMS S..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd