Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Determine the greatest load P the frame will support without causing the A992 steel member BC to buckle. Due to the forked ends on the member, consider the supports at B and C to act as pins for x - x axis buckling and as fixed supports for y - y axis buckling.
Drawdown at a 0.20 m diameter, fully penetrating well, which has been pumping at the rate of 1000 m^3/day for a long enough time that steady state conditions have been reached, is determined to be 0.70 m.
A temporary diversion has been constructed on a highway of +4 percent gradient due to major repairs that are being undertaken on a bridge. The maximum speed allowed on the diversion is 10 mph
A chlorination process is to be used to disinfect a wastewater treatment plant effluent. The plant treats 1.8MGD (million gallon per day). The water entering this unit has about 4500mg/L of coliforms, and the effluent target is 0.1 mg/L of coliforms.
The length of the pipeline in the building is 60 m, the water temperature is 20.C, and the water pressure on the top floor must be at least 150 kPa. Will a booster pump be required for the building If so, what power must be supplied by the pump
Air can be assumed as a di-atomic ideal gas. Find the final temperature and the amount of work ( in kW) required for air compression at a rate of 100 mol/s , from an initial condition of 1 bar an 25 C to 10 bar; for the following ways.
A surveyor is going to take a 5.5 mile sight across a lake from the top of one tower to a target on the top of another tower. It is desired to keep the line of sight 6 ft above the lake surface.
Supporting soil has a unit weight of 125 pcf. The results of laboratory tests on the soil samples indicated that the supporting soil's cohesion and angle of internal friction are 1200 psf and 25 degrees, respectively.
If the state standard downstream is not met, the state has informed town 1 that it must treat its sewage further so the downstream standard is met. Use a mass balance approach to show that the state%u2019s request is unfeasible.
Design a cord (design the constants k and ) so the cord stretches 2.5 times the unstretched length, and the acceleration of the jumper doesn't exceed 3g, and the cord has zero stiffness at the bottom of a 400ft drop.
how large a sample must we take in order to be a) 95% b) 90% c) 99 d) 99.73% confident that the error in the estimated mean lifetime will not exceed 20 hours.
A steady flow of refrigerant 134a enters a throttling valve in a refrigeration unit as a satrurated liquid with a pressure of 150 psia. The refrigerant is discharged with a pressure of 40 psia.
At a point in a saturated normally consolidated clay layer the soil is subject to an in-situ vertical effective stress of 50kPa. The soil at the point has a moisture content of 44% and a compression index of 0.45. The effective stress at the point is..
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd