Find the fraction of the original energy lost

Reference no: EM13277547

A ball dropped from 50 cm rebounds to a height of 33cm. Find the fraction of the original energy lost and the speed with which the nall left the ground after rebounding and where did the "lost" energy go?

Reference no: EM13277547

Questions Cloud

Determine the elongation of the cable : A high-speed lifting mechanism supports a 880-kg object with a steel cable that is 39.0 m long and 4.00 cm2 in cross-sectional area. Determine the elongation of the cable

How much work per cycle is required to run the freezer : To make ice, a freezer that is a reverse Carnot engine extracts 50 kJ as heat at -15°C during each cycle, How much work per cycle is required to run the freezer

What would be the maximum frame rate that it can support : If an amplifier, having a bandwidth of 1.5 MHz is connected to a video camera that provides frames (pictures) of size 352?288 pixels, what would be the maximum frame rate (in frames/sec) that it can support

How much overhead was allocated to each of two models year : The cost-allocation system Holly has been using allocates 90% of overhead costs to the standard cello because 90% of direct labor hours were spent on the standard model - How much overhead was allocated to each of the two models last year?

Find the fraction of the original energy lost : A ball dropped from 50 cm rebounds to a height of 33cm. Find the fraction of the original energy lost

What is the current-voltage and energy of the element : the charge entering the positive terminal of an element is q(t) = -12e-2t mC. and the power delivered to the element is p(t) = 2.4e-3t W . what is the current , voltage and energy of the element in the time interval 0

Determine carrier frequency nd intelligence signal frequency : The intelligence signal amplitude is 3 V. Determine the carrier frequency and intelligence signal frequency. If the output deviation changes to between 90.0015 and 89.9985 MHz, calculate the intelligence signal amplitude.

Calculate the total current running through the wire : A 10 ohm resistor is in series with a 1 and 5 ohm resistor parallel combination. Calculate the total current running through the wire

Generate enough samples to cover the range from 1 km : Simulating shadow fading. Simulate a sample path of a shadow fading process for equispaced samples on a straight line. Assume a correlation distance Dc = 500 m and a standard deviation of σz = 7.5 dB (these values are from Gudmundson's paper).

User Account

All Pages