Find the fraction of extraction steam flow

Assignment Help Mechanical Engineering

Reference no: EM13702466

A power plant with one closed FWH has a con- denser temperature of 45⁰C, a maximum pressure of 5 MPa, and a boiler exit temperature of 90⁰C. Extraction steam at 1 MPa to the FWH condenses and is pumped up to the 5-MPa feed water line, where all the water goes to the boiler at 20⁰C. Find the fraction of extraction steam flow and the two specific pump work inputs.

Reference no: EM13702466

Questions Cloud

District heating system should supply hot water : If the district heating system should supply hot water at 900C, what is the lowest possible condenser pressure with water as the working sub-stance?

The end of the bar will be in contact with the frame : A 250mm long brass bar (CTE = 20.5X10-6 / 0 C) is being supported as shown below. Initially, when the temperature is 15 deg C, there is a total clearance of 0.25mm between the right end (left end is secured to the left side support) of the bar and th..

Calculate the electric power input to the oven per unit : The electric reheating oven shown in the figure is used to heat a continuous sheet of metal from 25-1000C The metal speed is such that the strip of metal spends 2 hours inside this oven, The sheet thickness is 1cm and the ambient temperature is 25C w..

The beginning the channel is idle : An ad Hoc network using IEEE802.11 has 4 nodes: N1, N2, N3, N4. Assume that SIFS is 1 unit of time, PIFS 2 units of time, DIFS 3 units of time, and slot time is 2 (these values are not the real values but are taken to simplify the packets sched..

Find the fraction of extraction steam flow : A power plant with one closed FWH has a con- denser temperature of 450C, a maximum pressure of 5 MPa, and a boiler exit temperature of 900C. Extraction steam at 1 MPa to the FWH condenses and is pumped up to the 5-MPa feed water line, where all the w..

Global investment managers and index funds : Explain step by step the way to solve the question - Just to make sure that the work will not include the Global Investment Managers (GIM) and Index funds UK (IFU) from the file.

Learn the combined use of timer and the tracking of user : Lab 10 - The Student Game - Learn the Combined use of Timer and the tracking of user interactions Deliverables app.java, myJFrame.java, myJPanel.java, and other necessary Java files

Determine the exit temperature of the helium : Helium at 800kPa, 600C enters a steady flow turbine and leaves at 100kPa. The helium undergoes an expansion process through the turbine, does work in the amount of 900kj/kg, and loses 50kj/kg of energy by heat transfer to the surroundings.

The blocks will overcome friction : Mud is stopped using a wall made from 1.2 m high x 0.25 m wide rectangular concrete blocks as shown in figure below. Blocks density is 2700 kg/m3, mud density is 1800 kg/m3, and friction coefficient between ground and concrete blocks is f = 0.3 . The..

User Account

All Pages