Find the flow rate if the pump puts 22 hp in to the flow

Assignment Help Civil Engineering

Reference no: EM13548153

1.A 12 in diameter pipe, 9200 f t long (f = 0:024) discharges freely into the air at an elevation 18 f t below the surface of the water at intake. It is necessary to double the flow by inserting a pump at upstream end of pipe, If the efficiency of the pump is 73%, how much power will be required ?

2.A 110 f t long, 5 in in diameter (f = 0:033) connects two reservoir whose water surface elevations differ by 12 f t. Compute flow rate in pipe.

3.A liquid with specific gravity of 1:26 is being pumped from A to B through the pipeline. At A, the pipe diameter is 24 in and the pressure is 45 psi. At B, the pipe diameter is 12 in and the pressure is 50 psi. Point B is 3 f t lower than A. Find the flow rate if the pump puts 22 hp (16 kW) in to the flow. Neglect head losses.

Reference no: EM13548153

Questions Cloud

What is the probability that among 10 automobile accidents : Assuming that 50% of the automobile accidents are due to a speed violation. a) What is the probability that among 10 automobile accidents at least 6 will be due mainly to a speed violation?

Compute the volume flow rate required to produce : Compute the volume flow rate required to produce a Reynolds number of 3.60 x 10 ^4. then, if the pipe is clean steel, compute several points of the velocity profile and plot the data.

At what depth would the vertical effective stress in a deep : At what depth would the vertical effective stress in a deep deposit of clay be 100 kpa, if e=1.1? The ground water level is a 1 m delow ground surface and S=95% above the groundwater level. Neglect pore air pressure.

Determine the allowable soil pressure for a maximum settle : A square footing 6ft by 6ft is to be installed 6ft below ground level on a sand stratum. Standard penetration tests were conducted on the construction site

Find the flow rate if the pump puts 22 hp in to the flow : A 110 f t long, 5 in in diameter (f = 0:033) connects two reservoir whose water surface elevations differ by 12 f t. Compute flow rate in pipe.

Express the approximate alkalinity of this water as mg : A water sample has bucarbonate concentration of 220 mg/l ( HCO3- )and the PH of the water is 7.9 > Express the approximate alkalinityof this water as mg/l of CaCO3

Find all contact forces : Cylinders A & B weigh 500N each and cylinder C weighs 1000N. Assuming frictionless contact between all surfaces, find all contact forces. Diameters A&B= 1, C=2

Calculated the change in vertical effective stress on the : A culvert is to be constructed in a bed of sand (e = 0.5) for drainage purposes. The foof of the culvert will be located 3 m below ground surface. Currently the groundwater level is at ground surface.

Find the z components of the electric field : An electron has an initial velocity with an x component of zero, a y component of 9.35 km/s, a z component 16.1 km/s, and a constant acceleration of 1.60 x 1012 m/s2 in the positive x direction in a region in which uniform

User Account

All Pages