Find the final speed of both vehicles after the collision

Assignment Help Physics
Reference no: EM13544745

A 667 kg car stopped at an intersection is rear-ended by a 1600 kg truck moving with a speed of 13.5 m/s. If the car was in neutral and its brakes were off, so that the collision is approximately elastic, find the final speed of both vehicles after the collision. m/s (car) m/s (truck)

Reference no: EM13544745

Questions Cloud

Diffraction grating-what angle will second order peak occur : A diffraction grating with 300 lines per mm is used in an experiment to study the visible spectrum of a gas discharge tube. At what angle from the beam axis will the first order peak occur if the tube emits light with wavelength of 500.7 nm? At what ..
What is the minimum thickness of coating : What is the minimum thickness of coating which should be placed on a lens in order to minimize reflection of 646 nm light? The index of refraction of the coating material is 1.32 and the index of the glass is 1.57.
Calculate the distance between the two slits : Two narrow slits are illuminated by a laser with a wavelength of 537 nm. The interference pattern on a screen located x = 5.50 m away shows that the second-order bright fringe is located y = 6.00 cm away from the central bright fringe. Calculate the ..
How far does the putty-block system compress the spring : A 0.413 kg block is attached to a horizontal spring that is at its equilibrium length, and whose force constant is 24.6 N/m. The block rests on a frictionless surface. A 0.0500 kg wad of putty is thrown horizontally at the block, hitting it with an i..
Find the final speed of both vehicles after the collision : A 667 kg car stopped at an intersection is rear-ended by a 1600 kg truck moving with a speed of 13.5 m/s. If the car was in neutral and its brakes were off, so that the collision is approximately elastic, find the final speed of both vehicles after t..
Find the x- and y-coordinates of the center of gravity : Find the x- and y-coordinates of the center of gravity of a 4.00 ft by 8.00 ft uniform sheet of plywood with the upper right quadrant removed as shown in the figure below. The dimensions of the cutout are a = 4.10 ft and b = 2.10 ft. HINTS: Think ..
What is the direction from first oasis to the second oasis : Starting from one oasis, a camel walks 25 km in a direction of 30 degrees south of west and then walks 30 km toward the north to a second oasis. What is the direction from the first oasis to the second oasis?
What was the initial distance from the shuttle to astronaut : A 96 kg astronaut and a 1100 kg satellite are at rest relative to the space shuttle. The astronaut pushes on the satellite, giving it a speed of 0.25 m/s directly away from the shuttle. Seven-and-a-half seconds later the astronaut comes into contact ..
Clearance concept for macroscopic view of chemical removal : Consider the “clearance” concept for the macroscopic view of chemical removal by kidney. The effective volume in a human body is about 18 liters. The clearance of a person for a specific chemical is K = 2L/hr. (a). Determine the concentration of t..

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd