Find the final pressure and volume

Assignment Help Mechanical Engineering

Reference no: EM13717609

Ammonia at 10ºC and mass 10 kg is in a piston cylinder with an initial volume of 1 m3. The piston initially resting on the stops has a mass such that a pressure of 900 kPa will float it. Now the ammonia is slowly heated to 50ºC. Find the final pressure and volume.

Reference no: EM13717609

Questions Cloud

Find the volumetric displacement : An axial piston pump has nine 1/2in diameter pistons arranged on a 5in diameter piston circle. The offset angle is 8.3 degrees and pump speed is 3000rpm. Find the volumetric displacement. Please show ALL work.

Vibrometer has an undamped natural frequency : A vibrometer has an undamped natural frequency of 10Hz. and damped natural frequency of 8 Hz. Find the lowest frequency in the range to infinity at which the amplitude can be directly read from the vibrometer with less than 2 percent error.

Copper bulkhead at the entrance of a flow reactor : An 8" thick copper bulkhead (kept at 100 C by electrical heat) at the entrance of a flow reactor. The bulkhead is penetrated by a multitude of 0.25" diameter by 8" long cylindrical openings. The heated copper bulkhead is attached to 17" of excellent ..

Determine for the steam exiting the tank-mass flow rate : Three return steam lines in a chemical processing plant enter a collection tank operating at steady state at 1 bar. Steam enters inlet 1 with flow rate of 0.8 kg/s at 200 C. Steam enters inlet 3 with flow rate of 1.2 kg/s at 95 C. Steam exits the tan..

Find the final pressure and volume : Ammonia at 10ºC and mass 10 kg is in a piston cylinder with an initial volume of 1 m3. The piston initially resting on the stops has a mass such that a pressure of 900 kPa will float it. Now the ammonia is slowly heated to 50ºC. Find the final pressu..

Consider the mass and pulley system shown : Consider the mass and pulley system shown. Mass m1 = 33kg and mass m2 = 13kg . The angle of the inclined plane is given, and the coefficient of kinetic friction between mass m2 and the inclined plane is Î¼k=0.19.

Solve the equations of motion using rectangular coordinates : To set up and solve the equations of motion using rectangular coordinates. The 3-kg collar shown has a coefficient of kinetic friction Î¼k=0.205 with the shaft. The spring is unscratched when s=0 and the collar is given an initial velocity of v0=15.1..

Calculate the initial rate of cooling : A 0.025 m thick flat plate having a 20 cm X 20 cm cross section is made of plain carbon steel (k=30 W/mC), alpha=32.7 x10^-7m^2/s). The initial plate temperature is 727C. it is cooled by blowing 27C air over the top surface of the plate at 30 m/s; th..

The dry air mass flow rate entering the mixing chamber : Hot, moist outside air passes over a cooling coil, from which it exits in a saturated state at p=14.7lbf/in^2 and T=65F. The air is then mixed adiabatically with room air at p=14.7lbf/in^2, T=75F, phi=25%.

User Account

All Pages