Find the final mass inside and the heat transferred

Assignment Help Electrical Engineering
Reference no: EM13872863

A 100-L rigid tank contains carbon dioxide gas at 1 MPa, 300 K. A valve is cracked open, and carbon dioxide escapes slowly until the tank pressure has dropped to 500 kPa. At this point the valve is closed. The gas remaining inside the tank may be assumed to have undergone a polytropic expansion, with polytropic exponent n = 1.15. Find the final mass inside and the heat transferred to the tank during the process.

Reference no: EM13872863

Questions Cloud

Determine the rate of energy destruction : A 1000-W iron is left on the ironing board with its base exposed to the air at 20°C. If the temperature of the base of the iron is 150°C, determine the rate of energy destruction for this process due to heat transfer, in steady operation.
An air-standard diesel cycle has a compression ratio : An air-standard Diesel cycle has a compression ratio of 18.2. Air is at 27 ºC and100 kPa at the beginning of the compression process and at 1700 K at the end of theheat addition process. Using constant specific heats at room temperature, determine (a..
Rigid tank contains nitrogen : A 100-L rigid tank contains nitrogen (N2) at 900 K, 6 MPa. The tank is now cooled to 100 K. What are the work and heat transfer for this process?
Oliver place is a not for profit entity that cares : Oliver Place is a not for profit entity that cares for dogs until they are adopted. It uses a UCF, an RCF, and an EF. It charges its expenses to the care of animals program, special programs, and administrative expenses.
Find the final mass inside and the heat transferred : The gas remaining inside the tank may be assumed to have undergone a polytropic expansion, with polytropic exponent n = 1.15. Find the final mass inside and the heat transferred to the tank during the process.
Crew members attempt to escape from a damaged submarine : Crew members attempt to escape from a damaged submarine 126 m below the surface.What force must be applied to a pop-out hatch, which is 1.43 m by 0.716 m, to push it out at that depth? Assume that the density of the ocean water is 1024 kg/m3 and the ..
Change in the total volume of the water : A 100 Watt heater is used to melt 2 kg of solid ice at -10oC to liquid at +5oC at a constant pressure of 150 kPa. a) Find the change in the total volume of the water.
Determine the resistance : A 10-V battery supplies a constant current of 0.5amp to a resistance for 30 min (a) Determine the resistance, in ohms,
Brief summary/synopsis of play : Setting: When was the play supposed to have occurred? How did you know? What visual elements of the play told you so and Scenery: Describe the appearance of the stage. How did it fill the stage?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Analyze memory performance for a write and read operation

The goal is to design a memory system to support a small amount of data storage outside of the processor. The design is to be based on the 16K bit CY7C128A SRAM organized as 2Kx8. (a) Provide a high-level block diagram for such an interface.

  Find an equivalent angular velocity between the two current

If there is two AC currents in a circuit and both have different angular velocity, is there a way to analyze the circuit by finding an equivalent angular velocity between the two currents and superposition can't be used

  Determine what is the magnetic flux through the coil

(a) if there is no current in the loop, what is the magnetic flux through the coil (b) When the current in the coil is 3.8 A in certain direction, the net flux through the coil is found to vanish. What is the inductance of the coil.

  How much electric flux leaves surface of sphere of a radius

A point charge of 20nC is located at (4,-1,3), and a uniform line charge of -25 nC/m lies along the intersection of the planes x=-4 and z-6. a) calculate D at (3,-1,0). B)how much electric flux leaves the surface of a sphere of radius 5 ,centered a..

  What is the rms value of the largest sine-wave input

An amplifier with 40 dB of small-signal open-circuit voltagegain, an input resistance of 1M-ohm ,and an output resistance10-ohm drives a load of 100-ohm .What voltage and power gains(expressed in dB) would you expect with the load connected

  What is the current in the line feeding the three loads

Two machines and a lighting load are connected in parallel to a 240 V(rms), 60 Hz line. The first machine uses 230 kW of power at 0.85 power factor lagging. The second machine uses 95 kVA at 0.882 power factor leading. The lightening load consumes..

  Create a non-inverting op amp circuit to obtain vout

Create a non-inverting op amp circuit to obtain Vout = 12 V if R2 (RF) = 1100k-ohm and Vin =1V . Open up the attributes window of the op amp (click on the op amp symbol) and verify that VPOS = +15V and VNEG = -15V. Do not change any other attribut..

  What is the force to the nearest tenth of a mn on a charge

what is the force to the nearest tenth of a mN on a charge q=0.71micro coulums at the point p a distance of r=0.22 meters and what is the magnitude of the electric field to the nearest tenth of a N/C

  Explain the relationship between peak current peak-to-peak

describe the relationship between peak current peak-to-peak current and rms current. include in the discussion which

  Find the line-to-line voltage at the high-voltage terminals

A three-phase wye-delta transformer is rated 225-kV:24-kV, 400 MVA and has a single-phase equivalent series reactance of 6.08 ohms as referred to its high-voltage terminals. The transformer is supplying a load of 375 MVA

  An explosive shell with total mass 80 kg is launched

an explosive shell with total mass 80 kg is launched vertically into the air from a mortar. the shell explodes in

  What is the three phase motor connection star

What is the Three Phase Motor Connection STAR/DELTA Without Timer Power & Control Diagrams ?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd