Find the elevation of the pump relative to the reservoir

Assignment Help Mechanical Engineering
Reference no: EM13711495

A fire truck draws water from an open constant-level reservoir through a hose of 0.2 ft2 cross section. The water is discharged from the pump through another 0.2 ft2 hose to a surge tank pressurized to 120 psig with air at the top. The pump adds 970 ft lbf/slug of energy to the fluid. The water level in the surge tank is 3 ft above the pump centerline. From the surge tank the water flows steadily through a hose of 0.04 ft2 area to a nozzle of 0.01 ft2 area. The nozzle exit is held at the same level as the water free surface in the surge tank. Neglect all frictional losses and sketch the system.

Find the:

a) speed of the water leaving the nozzle

b) elevation of the pump relative to the reservoir

c) power required to drive the pump if it has an 80 % efficiency

d) maximum height above the reservoir that the stream of water exiting the nozzle can reach. 

Reference no: EM13711495

Questions Cloud

Determine the change in entropy : Five kg of nitrogen (N2) undergoes a process from p1 = 5 bar, T1 = 400K to p2 = 2 bar and T2 = 500K. Assuming ideal gas behavior, determine the change in entropy, in kJ/K
Heat treatment and toughness and hardness : The relationship between heat treatment and toughness and hardness i.e. briefly explain why the different heat treatments give different toughness and hardness values.
Determine velocity head and pressure head at elevation : Water flows in a 0.15-m-diameter vertical pipe at a rate of 0.65 m3/s and a pressure of 530 kPa at an elevation of 25 m. Determine (a) velocity head at elevation of 20 m, (b) pressure head at elevation of 20 m, (c) velocity head at elevation of 55 m,..
What is the rotational speed of the driven sheave : A v-belt drive system consists of a 12.4" diameter driving sheave and a 21.1" diameter driven sheave connected by a 5V belt. if the center distance is to be no more than 38" specify the longest possible standard belt that can be used and what the res..
Find the elevation of the pump relative to the reservoir : A fire truck draws water from an open constant-level reservoir through a hose of 0.2 ft2 cross section. The water is discharged from the pump through another 0.2 ft2 hose to a surge tank pressurized to 120 psig with air at the top. The pump adds 970 ..
Determine the change in the head loss of the fluid : Consider laminar flow of a fluid through a square channel with smooth surfaces. Now the average velocity of the fluid is doubled. Determine the change in the head loss of the fluid. Assume the flow regime remains unchanged.
Determine the heat transfer involved in this process : A closed rigid tank is filled with refrigerant 134a, initially at 10C a quality of 80% and a volume of 0.01m^3. A 12volt battery provides a 5amp current to the resistor for 5 minutes. If the final temperature of the refrigerant is 40C, a) determine t..
Find the overall unweighted and a-weighted sound pressures : White noise has a constant level when measured in frequency bands of constant width. Suppose a noise generator produces white noise over the octave bands 0.5,1,2,4,8 khz. Find the overall unweighted and a-weighted sound pressures if a sound pressure ..
Consider laminar flow of a fluid through a square channel : Consider laminar flow of a fluid through a square channel with smooth surfaces. Now the average velocity of the fluid is doubled. Determine the change in the head loss of the fluid. Assume the flow regime remains unchanged.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Package design

Package Design Brief: Assume you are the packaging engineer for a large consumer products company. In this company, the Packaging Design Briefs are initiated by the marketing group and forwarded to the Package Engineering group.

  Mechanical engineering questions

Define dynamic viscosity, Determine the centroid, Pressure due to the height of liquid, Advantage of changing the liquid, Calculate the total moment about the hinge of the seal gate.

  Automatic control

DOF system and Find the differential equation describing the system

  Write a paper on boyle''s law

Write a paper on Boyle's law and describe Compression and Combustion stroke . Also explain Charles's law and illustrate SI engine and CI engine.

  Verify the law for parallelogram of forces

To Verify the law for parallelogram of forces, law for triangle of forces and law of polygon of forces. These laws are very useful to calculate unknown forces in very short time.

  Discharge pressure of the compressor

What is the discharge revised discharge pressure of the compressor.

  The Case for Global Accounting Standards

The role of IFRS in both developing and developed capital markets.

  Wind turbine

Wind turbines are becoming more and more common as a method of energy production, wind turbines by their very nature are dynamic and are subject to and create their own internal and external kinematics and kinetics.

  Advanced design methodologies

8 x product engineering and design review (week 2 – 12), ~3 pages per item which must contain a brief description of the product then delve into concepts such as materials selection, manufacturing methods, life cycle analysis, recyclability and overa..

  Design of absorption column and the cooler

Design of absorption column and the cooler. Process design of other units should be completed along with pipe sizes.

  Determine the maximum total bending moment

Determine maximum total bending moment (static plus dynamic) of the beam under steady-state conditions.

  Force of the water on the gate

Determine the magnitude of the horizontal and vertical components of the force of the water on the gate.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd