Find the dry unit weight of the sample

Assignment Help Civil Engineering
Reference no: EM13565005

1.A soil has a total density of 1.80 Mg/m3. When fully dry, the soil has a density of 1.59 Mg/m3. The specific gravity of the solids is 2.57. Find the following soil parameters:

a)    Dry unit weight of the sample

b)    Natural water content

c) Porosity

d)    Degree of saturation

e)    Saturated unit weight

Reference no: EM13565005

Questions Cloud

Moment of inertia of a 0.98-kg bicycle wheel rotating : The moment of inertia of a 0.98-kg bicycle wheel rotating about itscenter is 0.13kg .m2. What is the radius of this wheel, assuming the weight of the spokes can be ignored?
Kinetic energy is translational and how much is rotational : When a pitcher throws a curve ball, the ball is given a fairly rapid spin. If a 0.15-kg baseball with a radius of 3.7cm is thrown with a linear speed of 48 m/s and an angular speed  of 42 rad/s, how much of its kinetic energy is translational and ..
What was the average power output used for this ride : The fastest that anyone has gotten to the top of a local mountain (elevation change of 3500 ft) is 44 minutes. Assume a weight of 160 lb for the bike and rider. What was the average power output used for this ride?
Find the resulting stress in the steel pipe material if the : If a manometer was used to measure the pressure drop and the fluid in the manometer was an oil with a specific gravity of 0.84, what would the vertical displacement of the oil menisci be for 1 inch of water pressure difference?
Find the dry unit weight of the sample : A soil has a total density of 1.80 Mg/m3. When fully dry, the soil has a density of 1.59 Mg/m3. The specific gravity of the solids is 2.57. Find the following soil parameters:
Determine the maximum acceleration of the camera : A camera is packed in a box and surrounded by packing material. The box is dropped vertically onto a horizontal surface. The vertical velocity of the box at the time that it hits the surface is v= 5m/s.
Show that the car must have exceeded the speed limit of 55 : highway patrol officer, you are patricipating in a speed trap. A car passes your patrol car which you clock at 55 mph. One and a half minutes later, your partner in another patrol car situated two miles away from you
Find the magnitude and location of the resultant hydrostatic : A circular hatch is located in a sloping wall of a water-storage reservoir, where the wall slopes at ? = 35° to the horizontal, the radius of the hatch R is 840 mm, and the center of the hatch yC is 3 m below the water surface (measured along the slo..
How many inch diameter rivets are required to transmit : How many 3?4-inch diameter rivets are required to transmit 55,000 lb from the two angles to the gusset plate if the allowable shear stress in the rivets is 15,000 psi? Assume each rivet carries the same amount of load.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the magnitude and location of the resultant hydrostatic

A circular hatch is located in a sloping wall of a water-storage reservoir, where the wall slopes at ? = 35° to the horizontal, the radius of the hatch R is 840 mm, and the center of the hatch yC is 3 m below the water surface (measured along the slo..

  What fraction of the tank air mass will be consumed on each

You are designing an underwater maintenance schedule for an offshore oil rig. The divers work at a depth of 15 m and the seawater density is 1027 kg m-3. They are known to consume 130 litres of air at the ambient temperature is 10oC over the time tak..

  What will be final weight of car if it is to achieve speed

vehicle manufacturer is considering an engine for a new sedan (Cd=0.34, Af=22ft^2). the car is being designed to achieve a top speed of 100 mi/h on a paved surface at sea level (p=0.002378 slugs/ft^3).

  Calculate the pressure in psignat the bottom of the tank

Assume a hydrostatic condition in a cubic tank with 64ft length, 32ft width and 16ft height. The tank is filled with 15ppg( pounds per gallon) fluid. Calculate the pressure in psignat the bottom of the tank.

  What will speed of the object be after it has fallen

Total energy (E) of a projectile is the sum of its kinetic and potential energy: E= 1/2 mV^2 +mgz where m is mass of projectile, V is speed, g is gravitational constant and z is height. 5.0 kg object, dropped from rest (V=0 at time t=0) what will spe..

  Calculate the change in reservoir pore volume

A reservoir cover is 12,000 acres and is 20 feet thick. The formation has initial porosity of 0.25. The pore volume compressibility of the reservoir rock is 3.0 x 10^(-6) psi^(-1) . Calculate the change in reservoir pore volume (in barrels) if the re..

  Compute the total energy per unit weight

A fluid flowing in a pipe 30cm in diameter has a uniform velocity of 4m/s. The pressure at the center of the pipe is 40KPa, and the elevation of the pipe's centerline above an assumed datum is 4.5m. Compute the total energy per unit weight of the ..

  Calculate the critical stressrequired for the propagation of

For a brittle material that has a specific surface energy of 0.26J/m2, and flexural strength and elastic modulus valuesof 76.6 MPa and 64 GPa, respectively, calculate the critical stressrequired for the propagation of a surface crack of length 0.05 m..

  Could apparatus be used for determing the density of liquid

The u-tube manometer has legs of unequal internal diameter d1 and d2, which are partially filled with immiscible liquids of density1, and density2 respectively and which are open to the atmosphere at the top.

  Determine the required area of the members

The truss is to be constructed of members with equal cross-sectional areas and using a material with yield stress 700 MPa. The structure must be designed to support a mass (m) of 3400 kg with a factor of safety of 3.

  Find the minimum euac for machine and its economic life

A machine has an initial cost of $10,000. Its market value declines by 20% annually. The repair costs are covered by a warranty in year 1, and then they increase $600 per year. The firm's MARR is 15%.

  How do concept of green design and industrial ecology differ

How do the concepts of green design, industrial ecology, and sustainable developement differ from past approaches to engineering design Prepare a brief report on this topic using some specific examples for illustration.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd