Find the corresponding range of rout and g

Assignment Help Electrical Engineering
Reference no: EM13274329

An emitter follower is operating at a collector bias current of 0.25 mA and is used to connect a 10 kiloohm source to a 1 kiloohm load. If the nominal value of beta is 100, what output resistance Rout and overall voltage gain G result? Now if transistor beta is specified to lie in the range 50 to 150, find the corresponding range of Rout and G.

Reference no: EM13274329

Questions Cloud

Define what is the concentration of the stock solution : A standard solution was made when 1.276g of pure copper wire (MM= 63.546g/mol) was weighed, dissolved in concentrated HNO3, and diluted to 1.00x102mL. What is the concentration of the stock solution
What is the resulting overall voltage gain of cb amplifier : A CB amplifier is operating with R load = 10 kiloohms, Rc = 10 kiloohms, and R signal = 100 ohms. At what current Ic should the transistor be biased for the input resistance Rin to equal that of the signal source
Explain neutralize the acid and convert : If, in practice, 5.0 mL of 16.0 M nitric acid were added to effect the dissolution of the copper, what would be the minimum volume of 4.00 M NaOH required to neutralize the remaining acid and convert all of the Cu2+(aq) to Cu(OH)2(s)
Find his resultant displacement from camp : hiker starts at his camp and moves the following distances while exploring his surroundings: 75.0 m north, Find his resultant displacement from camp
Find the corresponding range of rout and g : An emitter follower is operating at a collector bias current of 0.25 mA and is used to connect a 10 kiloohm source to a 1 kiloohm load. If the nominal value of beta is 100, what output resistance Rout and overall voltage gain G result
Determine which waveform in each pair is lagging : Determine which waveform in each pair is lagging: a) 6 cos(100πt-1000) and -6 sin (2π60t+1300)b) cos(10t-1000) and - cos(t-1000) c) cos (50πt - 1000) + cos (50πt - 200) and 9 cos (100πt - 200)
What is the final temperature of the lemonade : A copper container of mass 0.300kg contains 2.0 kg of lemonade at 33degree Celsius. What is the final temperature of the lemonade
Derive binding or ionization energy which is equal to energy : the donor energy level is approximately 0.1 ev below the conduction band. the approximate value is calculated from the binding energy equation from hydrogen. derive the binding or ionization energy which is equal to the total energy.
Find the length of shorter of two sides of initial rectangle : A rectangle has an area of 33.66 cm2. When both the length and width of the rectangle are increased by 1.30 cm, find the length of the shorter of the two sides of the initial rectangle

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Lithium ion battery technology

The paper includes Lithium ion battery technology with its advantages and disadvantages. The paper discusses about the Lithium air battery in which detailed reactions of Lithium with air including nonaqueous as well as aqueous are given.

  Power transformers and tariffs

Construction of different types of power transformer, significant energy savings

  Paper on orthogonal frequency-division multiplexing

This document is shown a paper on Orthogonal frequency-division multiplexing with advantages, disadvantages and uses.

  Function of the hmi in a scada system

This assignment contains electronics engineering questions like State the commonly found components of a SCADA (Supervisory control and data acquisition) system. and decribe the function of the HMI in a SCADA system.

  Resultant waveform of the odd harmonic series

Prepare an Excel graph showing the individual components and summated resultant waveform of the odd harmonic series resulting in an approximate square wave.

  Explain scada system

Explain the function of the HMI in a SCADA system.

  Design a 2-digit 24 second shot-clock

Design a 2-digit 24 second "shot-clock" countdown timer with pushbutton controller.

  Model a discrete-time system

To understand di erent signal models To be able to model a discrete-time system and design simple signal processing algorithms.

  Draw a relay construction diagram

Draw a relay construction diagram and briefly explain the operation of a relay.

  Frequency division multiplexing

Write a short technical report on Frequency Division Multiplexing

  Impact of electron energy

Briefly discuss the impact of electron energy, electron current and target on the Bremsstrahlung generated.

  Traffic light controller

The schematic of the traffic light controller

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd