Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Referring to Problem 38.1, the mechanical inaccuracies in the open-loop positioning system can be described by a normal distribution whose standard deviation = 0.005 mm. The range of the worktable axis is 500 mm, and there are 12 bits in the binary register used by the digital controller to store the programmed position. For the positioning system, determine
(a) control resolution,
(b) accuracy, and
(c) repeatability.
(d) What is the minimum number of bits that the binary register should have so that the mechanical drive system becomes the limiting component on control resolution?
Problem 38.1
A leadscrew with a 7.5 mm pitch drives a worktable in a numerical control positioning system. The leadscrew is powered by a stepping motor which has 200 step angles. The worktable is programmed to move a distance of 120 mm from its present position at a travel speed of 300 mm/min. Determine
(a) the number of pulses required to move the table the specified distance and
(b) the required motor speed and pulse rate to achieve the desired table speed.
A dynamic test on a structure using a portable shaker revealed the following: The accelerance between two locations (shaker location and accelerometer location) measured at a frequency ratio of 10 was 35 dB. Determine the corresponding mobility an..
an aluminium bottle weighs 10 kgs when empty and has an internal volume of 20 liters. it is filled with 5 kgs of
The solid sili- con powder is at Tsi,i = 298 K, and the solid silicon sheet exits the chamber at Tsi,o = 420 K. Both the surroundings and ambient temperatures are T00 = Tsur = 298 K.
The steam line leading to the turbine inle
the alaska pipeline in the chapter-opener photo has a design flow rate of 4.4e7 gallons per day of crude oil at 60 deg
Coal containing 5.0 wt% S is burned at a rate of 1250lbm/mm in a boiler furnace. All of the sulfur in the coal is oxidized to SO2. The product gas is sent to a scrubber in which most of the SO2 is removed, and the scrubbed gas then passes out of a..
Steam at 500oF and 50 psi is fed at the rate of 1 lbm/sec to an adiabatic compressor where its pressure is raised reversibly to 650 psia. Use data from the steam table to determine the changes in the enthalpy and entropy of the steam in the compressi..
a mixing chamber combines superheated steam and liquid water to produce a stream of saturated steam with a quality of
While completing your homework, imagine the study space you are using employs a space heater with a rating of 30 kW, a refrigerator (for snacks) that is rated for 5 kW, and a light fixture with two 100 W bulbs, all operating at a constant rate for th..
Consider a mixture of saturated liquid water and saturated steam at 2 bar and x = 0.95 that is compressed adiabatically and reversibly to 25 bar in an open system. What is the initial temperature and entropy?
The extrusion ratio, die geometry, extrusion speed, and billet temperature all affect the extrusion pressure. Explain why.
Indicate how PWM is useful in the control of dc motors. List the advantages and disadvantages of PWM.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd