Find the coefficient of friction between the trusses

Assignment Help Civil Engineering
Reference no: EM13562577

1.Find the coeficient of friction between the trusses and the inclined. Three trusses are 1m long 1kg each.

2.A hazardous waste incinerator is to burn 200 Kg/h of PCB waste that is 30 % PCB and 70 % organic solvents. During testing phase, the concentration of PCB in the emission was recorded as 0.025 g/ m³; and the stack flow rate is 50 m³/min. PCB in the ash was measured as 0.005 g/m³. What is the removal efficiency of the incinerator (%)?

Reference no: EM13562577

Questions Cloud

What is the speed of the bob at the botttom of the swing : A 2.0 m long Pendulum is released from rest, when the supportstring is at an angle of 25 degree with the vertical. What is the speed of the bob at the botttom of the swing
What is the rated flywheel power for a cat 834h 4 wheel : What is the rated flywheel power for a CAT 834H 4 wheel tractor equiped with converter drive? What are the maximum speeds, for this machine in each of the four forward gears?
Determine the maximum rimpull of the tractor in each gear : A pneumatic-tired tractor with a 354 - hp engine has a maximum speed of 3.6 mph in 1st gear. Determine the max. rimpull of the tractor in each gear if the engine effieicency is 91%. (1st gear = 3.8 mph, 2nd gear = 6.5 mph, 3rd Gear = 11.5 mph, 4th Ge..
Find the amplitude of resulting oscillation of this system : A 10-kg box is at rest at the end of an unstretched springwith constant k=4000 N/m. What is the amplitude of the resulting oscillation of this system
Find the coefficient of friction between the trusses : Find the coeficient of friction between the trusses and the inclined. Three trusses are 1m long 1kg each.
Calculate the speed of the suspended mass : A simple pendulum, 1.00m in length, is released from rest whenthe support string is at an angle of 35.0°from thevertical. What is the speed of the suspended mass
What minimum value of coefficient of traction between : Disregarding traction limitations, what is the maximum value of rolling resistance (in lb/ton) over which the fully loaded unit can maintain a speed limit of 15 mph?
What is the maximum external pull in each of the 4 gears : If a tractor with 23-hp, a max speed of 3.6 mph in 1st gear and an effieiciency of 92% is operated operated down a 4% slope and the rolling resistance is 80 lb/ton, what is the maximum external pull in each of the 4 gears.
How many atoms are in the copper block : In order to calculate the number of ways of arranging a givenamount of energy in a tiny block of copper, How many atoms are in the copper block

Reviews

Write a Review

Civil Engineering Questions & Answers

  Design simple horizontal curve to connect roadway tangents

Design a simple horizontal curve to connect two roadway tangents that deflect at an angle chosen between 50 and 75 degrees. Assign a station to the curve PI and select a curvature of 6 degrees.

  How much effort force is required to travel up

if a person and a wheelchair weigh 185 lbs how much effort force is required to travel up a ramp whose slope of 24.08 ft.

  Determine what speed will sleeve attain if force is applied

A Newtonian fluid is in the clearance between a shaft and a concentric sleeve. When a force of 600 N is applied to the sleeve parallel to the shaft, the sleeve attains a speed of 1 m/s. If a 1500 N force is applied, what speed will the sleeve atta..

  How to formulate a set of constraints that will enforce

Given the binary variables x1,x2,x3,x4 and x5, formulate a set of constraints that will enforce x3,x4, and x5 to equal one if x1=1 and x2=0.

  Determine the prism constant

A 100 ft cut steel tape was used to check the layout of a building wall. the rear surveyor held 42 ft while the head surveyor cut 0.33 ft. what is the distance measured?

  Four-lane undivided multilane highway

A four- lane undivided multilane highway ( two lanes in each direction) has 11- ft lanes and 5- ft shoulders. At one point along the highway there is a 4% upgrade that is 0.62 mi long.

  Disposal of excavated material

Discuss and use examples to explain the specific factors that you will need to consider when pricing the following items in the bill of quantities foundation excavation

  Determine stations of pc and pt of simple horizontal curve

The distance AB is measured as 322.33 ft, the angle at A is measured as 32º15' and the angle B is determined to be 41º30'. Determine the stations of the PC and PT.

  What do will result if the concentration of the waste

The discharge from the Renenutet sugar beet plant causes the DO at the critical point to fall to 4.0 mg/L. The Meskhenet Stream has a negligible BOD and the initial deficit after the river and wastewater have mixed is zero

  What is the toll that should be charged if it is desired to

A toll bridge carries 5000 vehicles per day when the toll is $1.50/vehicle. It is estimated that when the toll is increased by 25 cents, the traffic on the bridge will decline by 10% of the current volume.

  Find probability that sample standard deviation will exceed

it is found that the lifetimes of television tubes manufactured by a company have a normal distribution with mean of 2000 hours and standard deviation of 60 hours. if 10 tubes are selected at random

  Determine the force exerted on the tank bottom

A cylindrical water tank is suspended vertically by its sides. The tank has a 10-ft diameter and is filled with 20 degree celcius water to a 3-ft depth. Determine the force exerted on the tank bottom

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd