Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A cylindrical pressure tank has internal dimensions of 14.0 inches diameter, and 36 inches length from end to end. Max. recommended pressure at 70degF is 200 PSI. The cylinder has a safety relief valve which is set at 250 PSI. Determine the following:
1) Inside volume of the pressure tank in ft^3
2) Specific volume of the tank at 70degF and 200 PSI
3) The mass of the air in the tank
4) The tank pressure if 3.5 lbm of air is inserted into the tank at 70degF
Determine the maximum allowable misclose for this engineering survey using the formula based on the munber of instriunent stations used in the work.
Plot variation with depth from the top to Point C for σ' v and σ h when the soil is at rest and Estimate the undrained shear strength (c u ) of clay. (Assume the shear strengths to be 200 kPa and 2 kPa at Liquidity Index (IL) values of 0 and 1, res..
Compare and contrast the purpose and scope of the Federal Insecticide, Fungicide, and Rodenticide Act with the provisions of the Federal Food, Drug, and Cosmetic Act.
Briefly describe electron and hole motions in a p-n junction for forward and reverse biases;
You are going to assemble 1,000 bolt + hole combinations. The bolts have a mean diameter of 1.000 cm, normally distributed with standard deviation of 0.010 cm. The holes have a mean diameter of 1.030 cm, normally distributed with standard deviatio..
A sample with a measured background level (Bi) of 22 mg/l was spiked with the equivalent of 30 mg/l without appreciably changing the sample volume. The result for the spiked sample (Ai) was 49.2 mg/l. Calculate Pi and determine if it falls with th..
A laboratory consolidation test was performed on a clayey soil specimen, which was drained on both top and bottom. The time for 50% consolidation was 6.2 minutes, and the specimen's thickness at 50% consolidation was 0.740 in.
What is your recommendation for the maximum size of coarse aggregate for the following situation? A continuously reinforced concrete pavement cross section contains a layer of No. 6 reinforced bars at 15.24 cm centers,
shaped nozzle such that the velocity along the center line of the flow increased from 1.5 m / s to 15 m / s at a distance of 37.5 m. specify the amount of convective acceleration at the beginning and end of the range.
Set up a table showing curve elevations at the PVC, at the PVT, and at the half-station points along the curve. Compute the station and elevation of the curve turning point.
Motor M draws in the cable with an acceleration of 4 , measured relative to the 220 mine car. Determine the acceleration of the car. Neglect the mass of the pulleys.
Concept of CSTR, A lagoon is to be designed to accommodate an input flow of 0.10 m^3/s of nonconservative pollutant with concentration 30.0mg/L and reaction rate 0.20/day
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd