Find out what line code digital communications uses

Assignment Help Electrical Engineering
Reference no: EM13274604

Choose a product or technology that uses base band digital communications and find out what line code it uses. You may not choose RS-232 serial links or similar, or Ethernet because we talked about their line codes in class. What do they use? Examples you might look up include USB, Compact Discs, DVD, I2C, etc.

Reference no: EM13274604

Questions Cloud

How would you implement an 8b-10b encoder : Look up 8b/10b encoding and explain what purposes (NOTE: purposes is plural!) it serves. How would you implement an 8b/10b encoder
What are possible drawbacks associated with seeking advice : What are possible drawbacks associated with seeking advice from a financial planning professional? How might these concerns be minimized?
Describe the risks that you might encounter : Describe the risks that you might encounter when making financial decisions over the next few years.
Compute the charge on each : Two point charges totaling 9.00 µC exert a repulsive force of 0.250 N on one another when separated by 0.537 m. What is the charge on each
Find out what line code digital communications uses : Choose a product or technology that uses base band digital communi- cations and find out what line code it uses. You may not choose RS-232 serial links or similar, or Ethernet because we talked about their line codes in class.
Compute the percentage of each conformer at equilibrium : The energy difference of 3.8 kJ/mol between gauche and anti butane corresponds to an equilibrium constant, Keq, of approximately 1.9. Calculate the percentage of each conformer at equilibrium.
Compute the width of the pattern central maximum : You illuminate a slit of width 0.0527 mm with light of wavelength 715 nm and observe the resulting diffraction pattern on a screen that is situated 2.39 m from the slit
Which of following securities has the largest present value : Which of the following securities has the largest present value? Assume in all cases that the annual interest rate is 8 percent and that there are no taxes. a. A security that pays you $1,000 at the end of 1 year, $2,000 at the end of 2 years, and..
How much channel capacity is required for stereo 16bit audio : If I want to stream audio data over a digital data link how much channel capacity is required for stereo 16 bit audio sampled at 44kHz. How does this rate compare to common rates for MP3 formatted audio files.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is the angle at each tip of the cottage

The cross section of a cottage 20 ft wide is an isosceles triangle. If the slope of a side is 1.75 and there is a second floor 9 feet above the ground floor,What is the angle at each tip of the cottage?

  What is the pressure measured when the atd output given

A barometric pressure transducer is measuring pressure between 800 and 1100 mbars. If the transducer output is scaled to 0-5V and input to the HCS12 ATD confugured in 8-bit mode, what is the pressure measured when the ATD output = 0x5A

  Evaluate cross or auto correlation

You have to figure out which one using cross or auto correlation.

  Determine the value of the transfer function of the filter

The input to a certain filter is given by Vin(t)=2cos(10000pi*t-15deg) and the steady state output is given by Vout(t)=5cos(10000pi*t+25deg). Determine the (complex) value of the transfer function of the filter for f=5000 Hz.

  Determine the uncorrected poer factor and reactive load

A 2.4KV, single-phase circuit suppllies a load of 250KW at a lagging power factor, and the load current is 160A. If it is necessary to improve the power factor, determine the following: (a)The uncorrected poer factor and reactive load.

  Which configuration of trasistor is the most popular and why

For the three transistor configurations namely, the common-eitter, the common-collector, and the common-base, compare the voltage gain and the current gain for each configuration.

  Find the probability that the coin c4 was tossed

Further suppose that the coins C1, C2, and C3 are biased such that the probabilities of a head occuring for coins C1, C2, and C3 are 0.9, 0.75, 0.60, respectivley, while the fourth coin C4 is a fair coin. A. If the ou..

  Find out built-in potential barrier and widths of depletion

A junction is an n region next to an intrinsic region, which can be represented as an ntype region to a p-type lightly doped region. At T= 300K, the doping concentrations in silicon are Nd =1018 cm-3 and Na= 1013 cm-3.

  Determine the rms output noise levels

Assume that a receiver has a first amplifier stage with a 5KW input resistance, a gain of 300, an input audio signal of 20 mV, and an operating temperature of 27oC. When the amplifier is operating with a bandwidth first of 10 MHz

  Draw the logic diagram for the four-bit circuit

Draw the logic diagram for the 4-bit circuit, using full adders and multiplexers. Determine the arithmetic operation performed for each of the four combinations of S and Cin: 00, 01, 10, and 11.

  Derive the interchangeable relation between p and r

From the definition of polarization (p) Perrin equation, and anisstropy (r) introduced by Jablonski, derive the interchangeable relation between p and r.

  Determine the induced emf if a short in the rheostate

The resistance of the shunt field winding and the resistance setting of the shunt field rheostat of a separately excited generator are 10.26 ohm and 14.23 ohm respectively. The field circuit is connected to a 120-V DC source.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd