Find logic ckt to form part of automobile safety arrangement

Assignment Help Electrical Engineering
Reference no: EM13280279

Design a logic circuit to form part of automobile safety arrangement, providing a warning light, consisting of an LED, if (a) whenever the door is open or (b) when the seat belt is not buckled and the key is in the ignition.

Reference no: EM13280279

Questions Cloud

Find the magnitude of the impulse applied to the golf ball : A golf ball strikes a hard, smooth floor at an angle of 32.5 ° and rebounds at the same angle, What is the magnitude of the impulse applied to the golf ball by the floor
Explain reaction has an arrhenius constant for the reaction : A first order reaction has an Arrhenius constant for the reaction is 3.2 x 1010 sec -1, and an activation energy of 65.1 kJ. At what temperature (in Celsius) is the rate constant equal to 0.479 sec-1
Real-life proxy encounter with the complexity of medicare : Purpose of assignment is to have a real-life proxy encounter with the complexity of Medicare -
Calculate the expected rate of return and standard deviation : Calculate the expected rate of return and standard deviation of Escapist?
Find logic ckt to form part of automobile safety arrangement : Design a logic circuit to form part of automobile safety arrangement, providing a warning light, consisting of an LED, if (a) whenever the door is open or (b) when the seat belt is not buckled and the key is in the ignition.
Calculate the bond current price : A $1,000 corporate bond has an 8% annual coupon with semi-annual payments and compounding, with 10 years to maturity. The current market for a similar bond is 7% annual yield for a bond with similar risks.
Find which bucket holds more water : While on a camping trip, you would like to carry water from the lake to your campsite. find Which bucket holds more water
Which security has a higher effective annual interest rate : Which security has a higher effective annual interest rate?
Determine the force is exerted by the biceps muscle : Most of the motion generated by joints in the human body are examples of levers. An example of a third class lever is the forearm; what force is exerted by the biceps muscle

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Design a low pass active filter with frequency

Design a low pass active filter such that its roll off attenuates frequency components a 10kHz or more by more than 30 db. This means that the magnitude of the transfer function (in db) at frequency 10kHz should be -30db or less

  Determine the horsepower output and efficiency

A three-phase, four-pole, 50-hp, 480-V, 60-Hz, Y-connected induction motor has the following parameters per phase: r1 = 0.10  , x1 = 0.35  , r2' = 0.12  , x2' = 0.40  . It is known that the stator core losses amount to 1200 W and the rotational lo..

  How many k-maps would be needed to be solved to design

Given a state diagram with 622 states and 7 input variables, how many K-Maps would be needed to be solved to design the system using T flip-flops

  Calculate the voltage across the galvanometer and current

A Wheatstone bridge circuit has resistance arms of 400, 40, 602, and 6000 ohms taken sequentially around the bridge. The galvanometer has a resistance of 110 ohms and is connected between the junction of the 40- and 602-ohm resistors

  What is current density of the photodetector

CdS photodetector is irradiated by light with wave-length of 450nm and intensity of 30Wm^-2. If the band gap of CdS is 2.4 eV and all electron-hole pairs are extracted without recombination. What is current density of this photodetector

  Calculate the density of the manometric fluid

A U manometer reads 20 cm air as operating fluid and a given manometric fluid. A single branch closed tube reads 35 cm connected to point 1. If P2 = 1.2 ATM calculate the pressure in point 1 and the density of the manometric fluid.

  How to calculate capacitance from the given values

How to calculate capacitance from these values, Admittance(s) (2.9981e-6 + 8.3651e-14j), Terminal current(A) (5.9961e-6 + 1.673e-13j), Angular frequency(rad/s) (628.3185) and Electrical potential(v*m^2) (3.48e-12) all in 100Hz frequency

  Determine the power factor and complex power

The voltage across a certain load is V =1200*sqrt(2)*30 V, and the load impedance given by Z = 40 j30 ohms . Is the load inductive or capacitive Determine the power factor, complex power, real power, reactive power, and apparent power delivered to..

  Determine the total mvar and the capacitance per phase

Shunt capacitors are installed at the receiving end to improve the line performance. The line delivers 70 MVA, 0.8 lagging power factor at 64 kV. Determine the total Mvar and the capacitance per phase of the Y-connected capacitors.

  What signal strength should satellite receiver by processing

A satellite is 30,000 km from the Earths surface, receives signals at 14 GHz transmitted from the earth with an average power of 50 W, with an antenna gain of 55 dB in the direction of the satellite receiving antenna.

  Calculate the scalar magnitude on lead one

An ECG has a scalar magnitude of 1 mV on lead II and a scalar magnitude of 0.5 mV on lead III. Calculate the scalar magnitude on lead I.

  Find the volume of water used of the station

The effective water head for a 100 MW station is 220 metres. The station supplies full loadfor 12 hours a day. If the overall efficiency of the station is 86.4%,find the volume of water used.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd