Find available data storage capacity for each of raid level

Assignment Help Electrical Engineering
Reference no: EM13277786

Consider a 4-drive, 200GB-per-drive RAID array.What is the available data storage capacity for each of the RAID levels, 0, 1, 3, 4, 5, and 6?

Reference no: EM13277786

Questions Cloud

Compare the maximum theoretical pce for pumping : Compare the maximum theoretical PCE for 980-nm and 1475-nm pumping in an EDFA for a 1545-nm signal. Contrast this with actual measured results of PCE = 50.0% and 75.6% for 980-nm and 1475-nm pumping, respectively.
Find the work done by the ropes force : A rope is used to pull a 4.56 kg block at constant speed 5.47 m along a horizontal floor. find the work done by the rope's force
Explain the differences in molar heat capacities on melting : Calculate the difference in molar entropy (a) between ice and liquid water at 5.00 °C, and (b) between liquid water and its vapor at 90.0 °C and 1.00 atm. The differences in molar heat capacities on melting and on vaporization
Find out whether palliative care improves the mental health : Find out whether palliative care improves the mental health of people with advanced HIV.
Find available data storage capacity for each of raid level : Consider a 4-drive, 200GB-per-drive RAID array. What is the available data storage capacity for each of the RAID levels, 0, 1, 3, 4, 5, and 6
How many turns does the winding have : An air-filled toroidal solenoid has a mean radius of 15.5cm and a cross-sectional area of 4.95cm2, How many turns does the winding have
Describe importance of rare earth elements in science : Describe the importance of rare earth elements in science and technology. Assess the most common uses of these elements, particularly as encountered in your daily life, as well as projections for future demand of these minerals resources.
What is the rate of flow : A water hose of internal diameter 12.5 mm is used to fill a bucket. It is noted that 8L of fresh water (about 2 gallons) is collected in 1 minute. what is the rate of flow expressed as m^3/sec
Find the electrons and holes densities and the fermi level : A germanium wafer is doped with phosphurus Nd=10^15 cm^-3. Find the electrons and holes densities and the Fermi level at room temperature.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is the power factor of the current supplied

Two one phase loads, a 5kW resistor, and a 10kVA load with a 0.707 lagging power factor are connected in parallel to a 120 V source. What is The power factor of the current supplied to the two loads by the source

  What frequency of the siren does a person in the car hear

A car is traveling on a street at 24.6 m/s. An ambulance is behind the car, moving in the same direction and with a speed of 38.7 m/s. The siren on the ambulance is emitting sound at a frequency of 1575 Hz. The speed of sound in the air is 343 m/s..

  What is the largest data that can be carried into the cpu

A given computer has a 32-bit data bus. What is the largest data (in decimal) that can be carried into the CPU at a time 13.In a given byte-addressable computer, memory location 10000H-9FFFFH are available for user programs.

  Which part of the magnetic circuits stores more power

In transformer designs, often you can find an air gap in the core. In all the electric machines, there is an air gap between the stator and rotor. In both cases, flux will go through both core material and the air gap.

  Find the probability of bit errors occurring in the frame

Let the probability of a bit error be p, and the length of a data frame be N. Find the probability of 1, 2, 3, and 4 bit errors occurring in the frame. a) Tabulate the results for N = 1000, 10000, and 100000 bits, for p = 10-6, 10-8, and 10-14

  Define a communication strategy over the awgn channel

Consider a communication strategy over the AWGN channel where for a fraction of time α, a capacity-achieving code at power level P1 is used, and for the rest of the time a capacity-achieving code at power level P2 is used

  Design an inverting amplifier using an ideal op-amp

Design an inverting amplifier using an ideal op-amp. the input resistance is 100kohms and the input voltage is 1V. A load resistor of 1kohms is connected to the output and must draw 5mW of power. find output voltage and current .

  Determine for how long can the capacitor sustain the light

A 1.4 mF capacitor has initial voltage of 19 V.The energy stored in the capacitor is used to light up a 0.5 KOhm lamp.Assuming that the lamp is completely dimmed when the current through it is less than 0.4 mA, for how long can the capacitor susta..

  Will the breaker likely be tripped

Calculate current flow and describe its probable path. Will the breaker likely be tripped? Is there a risk of electrocution? If so what factors contribute to the risk?

  Determine the sending end quantities and voltage regulation

The ABCD constants of a three-phase, 345-kV transmission line are A = D = 0:98182 + j0:0012447. The line delivers 400 MVA at 0.8 lagging power factor at 345 kV. Determine the sending end quantities, voltage regulation, and transmission efficiency.

  Design the simplest circuit that has three inputs and output

Design the simplest circuit that has three inputs, X1,X2, and X3, which produces an output value of 1 whenever exactly one or two of the input variables have the value 1; otherwise, the output has to be 0.

  Write equation for voltage across the capacitor for all time

Write the equation for the voltage across the capacitor for all time t > 0 (that is, after the switch opens at t = 0). Assume that the switch has been closed a long time before t = 0 to determine the initial condition on the capacitor.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd