Find acceleration and direction of the motion of the system

Assignment Help Physics

Reference no: EM13323463

3 objects are connected on an inclined table with the masses of 8.0kg, 4.0kg and 2.0kg and the pulleys are frictionless. The tabletop is rough, with a coefficient of kinetic friction of 0.47 and makes an angle of 20.0 degrees with the horizontal.

a) draw a free body diagram for each object.

b) determine the acceleration and direction of the motion of the system.

c) determine the tensions in the 2 cords.

Reference no: EM13323463

Questions Cloud

Compute the ph of a bufer nh4cl : calculate the pH OF 100.0 mL of a bufer that is 0.050 M NH4Cl and 0.110 M NH3 before and after the addition of 1.00 mL of 5.75 M HNO3. before=9.59 after=

What is the temperature change of the air : An indoor swimming pool of depth 2m transfers heat at a rate of 100w/m2 to the 10m of air between the pool and the roof for 1000s. What is the temperature change of the air

What is the specific discharge in the rectangular channel : A large concrete channel holds a hydraulic jump in which the subcritical depth of flow is 2.5 m. If 40 percent of the specific energy in the flow is lost through the hydraulic jump, what is the specific discharge in this rectangular channel

Divide the sodium hydroxidecharge into 10 smaller charges : Divide the sodium hydroxidecharge into 10 smaller charges, and add them one at a time, makingsure that each is well mixed and the tank temperature has stoppedincreasing before adding the next charge.

Find acceleration and direction of the motion of the system : 3 objects are connected on an inclined table with the masses of 8.0kg, 4.0kg and 2.0kg and the pulleys are frictionless. determine the acceleration and direction of the motion of the system

Determine the total solids in the sample : A surface water sample has been evaporated until dry in a crucible dish. The dry (tare) weight of the crucible is 44.642gm. The weight of the residue plus the cruciible is 44.6484gm.

Explain the delta h for the neutralization of naoh : The delta H for the neutralization of NaOH with H2SO4 is -144kj/mol H2SO4. What is the maximum measured temperature in the styrofoam cup

Determine the required bolt spacing in the longitudinal x : A 10 m long built-up beam is to be fabricated from a universal section beam (UB) and two 'C' channel sections (as indicated). The beams are joined by bolts, with the allowable shear load in each bolt being 12 kN.

What frequency would be required : If a 2.4 m wave was created using a frequency of 63 Hz, what frequency would be required to creat the next higher harmonic

User Account

All Pages