Filter in each filter cycle

Assignment Help Civil Engineering
Reference no: EM1382837

A rapid sand filter has a loading rate of 8.00 m/h, surface dimensions of 10 m x 8 m, an effective filtration rate of 7.70 m/h, and a production efficiency of 96 percent. A complete filter cycle duration is 52 h and the filter is rinsed for 20 minutes at the start of each cycle.

a) What flow rate (m 3/s) does the filter handle during production?

b) What volume of water is needed for backwashing plus rising the filter in each filter cycle?

Reference no: EM1382837

Questions Cloud

Explain slave drive-sharing same data cable-computer system : If the CD drive and hard drive are sharing same data cable in computer system, what kind of connection is CD drive using? Which of the two drives must be set to master?
Market supply of labor : Use a graphical illustration to describe briefly what the influence an increase in immigration on the market supply of labor
Illustrate what data are you going to gather from target : It will identify problems with Medicaid and Medicare claims which affect physician and hospital claims fraud which may arise because of deliberate planning or casual opportunity. Illustrate what data are you going to gather from your target audienc..
Mediation-negotiation-arbitration or litigation : 300-500 words on an internet article regarding (choose 1) mediation, negotiation, arbitration or litigation. The article should reflect the following:
Filter in each filter cycle : a) What flow rate (m 3/s) does the filter handle during production? b) What volume of water is needed for backwashing plus rising the filter in each filter cycle?
What is the diameter of the moons image : If the translation rms speed of the water vapor molecules in air is 703 m/s, what is the translational rms speed of the carbon dioxide molecules in the same air? Both gases are at the same temperature.
Question about dilution problem : Suppose that you require to dilute a 3mM solution to a concentration of 1 x 10-6 M. Pipettors that dispense volumes ranging from 10~100.
Compare and contrast the native relations of each group : Compare and contrast the native relations of each group. Which group created a strong alliance with natives and elucidate why?
What is the average number of cars in the system : What is the average number of cars in the system (both in line and at the window)? Do not round intermediate calculations. Round to 2 deceimal places.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Temporary change on the highway

Determine the minimum distance from the diversion that a road sign should be located informing drivers of the temporary change on the highway. The letter height on the road sign is 5 inches.

  Determining a maximum safe speed

The central angle is 35 degrees, the superelevation is 0.08, and 20.6 ft is cleared (for sight distance) from the inside edge of the innermost lane. Determine a maximum safe speed (assuming current design standards) to the nearest 5 mi/h.

  Calculate the total drilling cost

Calculate average figures for tonnes/round and powder factors in kg/tonne and Determine the drill metres required to achieve a production rate from grade control blasting.

  Change in it internal energy

A gas is compressed at a constant pressure of 0.800 atm from 9.00L tp 2.00L. in the process, 400J of energy leave the gas by heat. (a) What is the work done on the gas? (b) What is the change in it internal energy?

  Highway construction project

A soil sample was taken from a proposed cut area in a highway construction project and sent to a soils laboratory for a compaction test, using the Standard Proctor compaction procedure. Results of the test are as follows:

  Difference between total and static pressure

The difference between the total and static pressure before a shock is 75 psi. What is the maximum static pressure that can exist at this point ahead of the shock? The gas is oxygen.

  Dry unit weight of material

A soil borrow material in its natural state in the ground has a unit weight of 118pcf. Its natural water content is 7%. What is the dry unit weight of this material?

  Write a report on toxic and hazardous waste

Toxic and Hazardous waste: how are they treated, safety measures, regulations in USA about hazardous waste.

  Resulting center of gravity

The section of the plywood in the 3rd quadrant is sawed off and the resulting piece is then glued squarely over the 4th quadrant portion of the plywood with glue of negligible weight.What are the x- and y-coordinates of the resulting center of gra..

  Difference between labor cost and labor pro-ductivity

Determine the number of man-hours required to form the structure using data from R. S. Means or other appropriate reference. What is the difference between labor cost and labor pro-ductivity?

  Highest point of the piping system

a) The maximum flow rate that can be achieved without cavitation occurring in the piping system. b) The maximum elevation of the highest point of the piping system to avoid cavitation.

  Complete cycle of the motion

Find the time for one complete cycle of this motion if the spring constant is 21 N/m. (Assume that once the pendulum ball hits the spring there is no effect due to the vertical movement of the ball.)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd