Express the tension in each cable as a function

Assignment Help Civil Engineering
Reference no: EM13562565

A tower is guyed by cables AB and AC. A worker ties a rope oflength 12 m to he tower at A and exerts a constant force of 160 Non the rope.

(a) Express the tension in each cable as a function oftheta knowing that the resultant of the tension in the cables andthe rope is directed downward.

(b) Plot the tension in each cableas a function of thete 0 < theta < 180 degrees, and determinefrom the graph the range of values of theta for which both cablesare taut.

Reference no: EM13562565

Questions Cloud

What would be the void ratio of the clay at the point : At a point in a saturated normally consolidated clay layer the soil is subject to an in-situ vertical effective stress of 50kPa. The soil at the point has a moisture content of 44% and a compression index of 0.45. The effective stress at the point is..
Determine the compression index of the clay : A layer of normally consolidated clay has been filled with 2m of gravel at a unit weight of 17kN/m3 for a long period of time and the settlement of the clay layer monitored giving a total final settlement of 330mm.
Find the shear stress at the pipe wall : Water at 50 C flows in a 150-mm diameter pipe with a velocity of 7.5 m/s. Measurements of head loss through the pipe indicate that f=0.020. Determine the value of e. Find the shear stress at the pipe wall and at r=30 mm. What is the value of du/dy at..
Estimate the ultimate total settlement : The settlement analysis for a proposed structure indicates that 6cm of settlement will occur in 4 yr and that the ultimate total settlement will be about 25cm. the analysis is based on the assumption that the compressible clay layer is drained at bot..
Express the tension in each cable as a function : A tower is guyed by cables AB and AC. A worker ties a rope oflength 12 m to he tower at A and exerts a constant force of 160 Non the rope.
Find the approximate flow rate : Water at 20 C flows in a conduit with a cross-section shaped in the form of an equilateral triangle. The cross-sectional area of the conduit is 100 sqaure meters and e=0.045 mm. If the friction head loss is 1 m in 50 m, find the approximate flow rate..
Compute how much work does she do : A 50.0-kg student climbs a 5.00-m-long rope and atops at the top. How much work does she do
What is the total preassure at the bottom of the glass : There is a glass filled with 20cm of water and on top alayer of 30cm of oil, that exactly weights 0.700Newton. What is the total preassure at the bottom of the glass
What volume of air went through in 24hrs : A hi-vol clean filter weighs 18g and the dirty filter wighs 18.6g. the initial and final air flows are 70 and 60 ft3/min.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find what is the stretch of the 360 cable under the load

What is the maximum load that a .75" diameter steel cable can hold if the UTS of the steel is 145,000 PSI and a safety factor of 1.5 is required.What is the stretch of the 360" cable under this load

  What are the normal stresses in the bars afterward

The cross sectional area of each bar is A = 400 mm2 and L = 250 mm. If the cross bar is loaded with a load P = 250 kN, what are the normal stresses in the bars afterward?

  Estimate the velocity with which you would contact

Estimate the velocity with which you would contact the ground if you jumped from an airplane at an altitude of 500ft and a) air resistance is negligible, b) air resistance is important, but you forgot your parachute, and c) you use a 25-ft-diameter p..

  What pipe size (diameter) is required

Crude oil (s.g.= 0.86, m =7.18*10-3 Pa*s) is to be carried at a flow rate of 0.25m3/s between two tanks with a difference of surfaceelevation of 9 m. The pipeline is smooth (e=0) and 90m long. What pipe size (diameter) is required?

  How fast will ball c be traveling after all collisions have

Three particles are sliding along a flat, frictionless surface. mA = 0.4 kg, mB = 0.5 kg, and mC = 0.4 kg. Before any collisions take place, vA = 15i m/s, vB = 10im/s, and vC = 5 m/s

  Calculate departures and latitudes in departure and latitude

The following data apply to a closed link traverse. Compute preliminary azimuths, adjust them. and calculate departures and latitudes, misclosures in departure and latitude, and traverse relative precision.

  Determine the perpendicular distance from o to cable bd

A precast concrete wall section is temporarily held by two cables as shown. Knowing the tension in cable BD is 900 N, determine the moment about point O of the force dxerted by the cable at B. Next determine the perpendicular distance from O to cable..

  What is the length of shrinkage

A meter long steel plate with a rectangular cross section(10mm x 50mm) is resting on a frictionless surface under the sun.the plate temperature is measures to be at 40C.the plate is then moved into a cold room and is left to rest on a frictionless su..

  How much settlement has occurred when the time factor is

If the final consolidation settlement is expected to be 1.0m, how much settlement has occurred when the time factor is 0.2 andwhen it is 0.7?

  Determine what force is required to hold the shield in place

Water at 70oC (row = 1.94 slugs/ft3) flows out of a nozzle (diam. = 1in) with a velocity of 10 ft/s at an individual holding a protective shield. If the water deflects off of the shield perpendicular to the original stream in all directions

  What is the max amount of benzene that the company can

A company near City X want's to know how much benzene they can release into River Y. City Z is 85.5 miles downstream from City X. City Z doesn't want to have Benzene levels higher than 0.0000015 g/L.

  When is the rider going to reach the stopping point

If we apply a breaking system to a skateboard while the speed of the skateboard is 5Milies per hour, the rider average weights is 180bounds while his height is 170 cm

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd