Express f in cartesian vector form using coordinate system

Assignment Help Civil Engineering
Reference no: EM13302054

The cable from point A to point B exerts a 900 N force on the top of the television transmission tower that is represented by the vector F. Express F in Cartesian vector form using the coordinate system.

Reference no: EM13302054

Questions Cloud

Determine what is the magnitude of fb for the requirement : The cables A and B exert forces FA and FB on the hook. The magnitude of FA is 100 lb. The tension in cable B has been adjusted so that the resultant of the two forces is oriented perpendicular to the wall to which the hook is attached.
What is his value for the focal length of the lens : The Position of the object (wire gauze) on the meter stick is at the 5.00 cm mark. What is his value for the focal length of the lens
What factor you consider for effective location planning : You are the CEO of a company. what factor could you consider for effective location planning?
Find at what height should you center the pattern on wall : You're an optometrist, mounting a projector at the back of your 4.2m -long exam room, 2.6m above the floor. At what height should you center the pattern on the wall
Express f in cartesian vector form using coordinate system : The cable from point A to point B exerts a 900 N force on the top of the television transmission tower that is represented by the vector F. Express F in Cartesian vector form using the coordinate system.
Define reactions and state the dominant mechanism : Complete the following reactions and state the dominant mechanism where indicated 3-chloro - 2,2-dimethylbutane + NH3
Federal system and home states system : Explain how cases follow this path, in both the Federal system as well as your home state's system. Show how cases are appealed and for what reasons they may be appealed. How do appellate courts (including the Supreme Court) decide which cases to acc..
How much power did it take to complete the race : A 83.55kg woman walked a 5k race in 53.33 minutes. How much power did it take to complete the race
Determine the magnitude and direction of the resultant : Part of the roof of a sports stadium is to be supported by the cables AB and AC. The forces the cables exert on the pylon A to which they are attached are represented by the vectors FAB and FAC.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Well-known architect frank lloyd wright

Many years ago, well-known architect Frank Lloyd Wright designed a mile-high skyscraper, which has never been built.

  Determine energy that must be delivered by motor to pump

A pump, which has an efficiency of 75%, adds 15 m of head to the flow of 20 L/s of water through a 100 mm diameter pipe. determine The energy that must be delivered by the motor to the pump

  Determine how would distance be accomplished specifically

A sailboat capsizes a large distance from shore. What might be done to 1) right the boat and 2) prevent this from occurring again. How would this be accomplished specifically

  Calculate the normal and shear stress on planes making angle

a tension member with cross-sectional area 3 in2 resists a load of 10 kips. How do you Calculate the normal and shear stress on planes making a 0, 20, 45, and 60 angle with the transverse section.

  Calculate ultimate bod where discharge and river meet

Wastewater from a paper mill contains ultimate BOD of 200ppm and DO of 3ppm, water is discharged at a rate of 100,000 gallons per day into a river, the river has a flow of 1 million gallons per day with no BOD

  Determine the dimensions of an ideal circular settling tank

determine the dimensions of an ideal circular settling tank that can remove 0.01-in diameter particles with a specific gravity of 1.01. Use a detention time of 1.5 hours, flowrate= 4ft^3/sec, the specific weight of water=62.4 lb/ft^3

  Estimate how long it will take before the daily maximum

Estimate the steady state PM10 concentration assuming a PM10 deposition velocity of 0.12 cm/s, prevailing wind velocity of 2.5 m/s, and a constant emission flux of PM10 0.82 mg/m2-s.

  Determine the expected speed of prototype to ensure numbers

A model of a submarine, at 1:15 scale, is to be tested at 0.8 ft/s in a wind tunnel at standard at mospheric pressure, while the prototype will be operated in seawater. Both the air and water are at 10 C (50 F).

  How much effort force is required to travel up

if a person and a wheelchair weigh 185 lbs how much effort force is required to travel up a ramp whose slope of 24.08 ft.

  What must drivers eye height be in van for students claim

A civil engineering student contends that 60 mph is safe in a van because of the higher drivers line of site. If all other design inputs are standard, what must the drivers eye height be in the van for the students claim to be valid

  Construction of the embankment

Pore water pressure is to be observed during the construction of the embankment. Calculate the pore water pressure which must not be exceeded at any point in the clay layer 9 m below the surface of the embankment to ensure a shear strength of 100 ..

  Explain about atterberg limits and cohesion for shear test

What relationship between Atterberg limits and cohesion for Shear test

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd