Explain why the periscope no long works

Assignment Help Physics
Reference no: EM13544761

A periscope for a submarine uses two totally reflection 45°-45°-90° prisms with total internal reflection on the side adjacent to the 45° angles. It springs a leak, and the bottom prism is covered with water. Explain why the periscope no long works. (nprism = 1.52, nwater = 1.33).

Reference no: EM13544761

Questions Cloud

What is the effective load resistance of the secondary coil : A transformer consists of 300 primary windings and 832 secondary windings. 1. If the potential difference across the primary coil is 22.5 V , what is the voltage across the secondary coil? 2. If the potential difference across the primary coil is 22...
What will be the current in the secondary coil : You need a transformer that will draw 16 W of power from a 220 V (rms) power line, stepping the voltage down to 12 V (rms) What will be the current in the secondary coil? Express your answer to two significant figures and include the appropriate un..
Current in the circuit to reach half of its maximum value : A 1.80 mH inductor is connected in series with a dc battery of negligible internal resistance, a 0.840 k-ohm resistor, and an open switch. How long after the switch is closed will it take for the current in the circuit to reach half of its maximum..
What is the angular frequency of the charge oscillations : A 18.0 uF capacitor and a 5.40 mH inductor are connected in series with an open switch. The capacitor is initially charged to 6.50 uC. What is the angular frequency of the charge oscillations in the capacitor after the switch is closed?
Explain why the periscope no long works : A periscope for a submarine uses two totally reflection 45°-45°-90° prisms with total internal reflection on the side adjacent to the 45° angles. It springs a leak, and the bottom prism is covered with water. Explain why the periscope no long works. ..
What is the self-inductance of this solenoid : An ideal toroidal solenoid has a cross-sectional area of 0.500 cm^2 , a mean radius of 15.0 cm , and 1600 turns. What is the self-inductance of this solenoid?
What is the mutual inductance of combination of two coils : A 10.0 cm -long solenoid of diameter 0.400 cm is wound uniformly with 800 turns. A second coil with 50.0 turns is wound around the solenoid at its center. What is the mutual inductance of the combination of the two coils?
About the bottom end of rod after being given slight nudge : A thin, cylindrical rodscript l=24.6cmlong with a massm= 1.20 kghas a ball of diameterd=10.00cmand massM= 2.00 kgattached to one end. The arrangement is originally vertical and stationary, with the ball at the top as shown in the figure below. The co..
Calculate the average force exerted on the block : A 10 g bullet moving 1000 m/s strikes and passes through a 2.0-kg block initially at rest, as shown. The bullet emerges from the block with a speed of 400 m/s. (a) (5 pts) How much energy was lost in the collision?

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd