Explain what masses of cacl2 and water are used

Assignment Help Chemistry

Reference no: EM13287075

You need to dissolve CaCl2 in water to make a mixture that is 31.5% calcium chloride by mass. If the total mass of the mixture is 380.6 g, what masses of CaCl2 and water should be used?

Reference no: EM13287075

Questions Cloud

Explain x2 represent the mole fractions of 1-propanol : Let x1 and x2 represent the mole fractions of 1-propanol and 2-propanol in a liquid mixture, respectively, and y1 and y2 represent the mole fractions of each in the vapor phase. For a solution of these liquids with x1 = 0.660, calculate the compos..

What force does the middle block exert on the leftmost block : Blocks of 1.0, 2.0, and 3.0 kg are lined up on a frictionless table with a 12 N force applied to the leftmost block

What will be the current assuming nothing else changes : If the voltage drops by 20 % , what will be the current, assuming nothing else changes If the resistance of the device were reduced by 20 % , what current would be drawn at 240 V

Obtain the final equilibrium temperature : 470 cm3 of water at 82°C is mixed with 95 cm3 of water at 8°C. Calculate the final equilibrium temperature, Calculate the final equilibrium temperature assumning no heat loss after mixing occurs

Explain what masses of cacl2 and water are used : You need to dissolve CaCl2 in water to make a mixture that is 31.5% calcium chloride by mass. If the total mass of the mixture is 380.6 g, what masses of CaCl2 and water should be used

Find the signal-to-noise ratio at the bandpass filter output : The message waveform uses a root-raised-cosine line code with α=1. The bandpass filter in the receiver front end has a rectangular frequency response with a bandwidth equal to the absolute bandwidth of the received signal.

What would be the transmission and reflection coefficients : derive and determine the transmission reflection coefficients for a particle traveling with an energy (a) 2ev and (b) 20ev. If the block is given infinite potential and the length is expanded to 1m,(c) what would be the transmission and reflection..

How much water must be displaced to float a cubical block : How much water must be displaced to float a cubical block of wood (density 655 kg/m^3) that is 15.0 cm on a side

Define heavy water has a formula d2o : Heavy water has a formula D2O, and semi-deuterated water has the formula DHO, where D stands for deuterium. Using the data below, etimate the percentages of D2o and DHO present in natural water

User Account

All Pages