Explain what design speed was used to design the curve

Assignment Help Civil Engineering
Reference no: EM13310654

A freeway exit ramp has a single lane and consists entirely of a horizontal curve with a central angle of 90 degrees and a length of 628 ft. If the distance cleared from the centerline for sight distance is 19.4 ft., what design speed was used to design the curve?

Reference no: EM13310654

Questions Cloud

What is the station of the pt on a single-lane highway : A Horizontal curve on a single-lane highway has its PC at station 123+70 and its PI at station 130+90. The curve has a super-elevation of 0.06 ft/ft and is designed for 70 mph. What is the station of the PT
Determine what is the stationing of the pc and pt : A horizontal curve is being designed through mountainous terrain for a four-lane road with lanes 10 ft. wide. The central angle is known to be 40 degrees, the tangent distance is 520 ft., and the stationing of the tangent intersection (PI) is 2600..
What is the gauge pressure : A submarine dives to a depth of 310 feet in the ocean. What is the gauge pressure at this depth? How many atmospheres is this
Describe the leadership styles of john and shawn : How would you describe the leadership styles of John and Shawn?
Explain what design speed was used to design the curve : A freeway exit ramp has a single lane and consists entirely of a horizontal curve with a central angle of 90 degrees and a length of 628 ft. If the distance cleared from the centerline for sight distance is 19.4 ft
Discuss the costs involved in implementing the database : Using the SafeAssign link in Blackboard to submit your report. Download and print out the FULL report and attach to the appendix at the back of your report. Assignments without the full SafeAssign report will NOT be marked.
Determine a maximum safe speed to the nearest 5 mph : The central angle is 35 degrees, the super elevation is 0.08, and 20.6 is the cleared (for sight distance) from the inside edge of the innermost lane. Determine a maximum safe speed to the nearest 5 mph.
Determine if the drive way will be affected : A developer wants to provide access to a new building from a driveway placed 1000 ft upstream of a busy intersection. He is concerned that queues developing during the red phase of the signal at the intersection will block access.
Uncertainty and decreasing profitability : AirWays Global, a US commercial airline, is experiencing marketing problems three years after 9/11. While the industry as a whole is on the path to recovery, after three years of uncertainty and decreasing profitability

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the axial force in member hj

The frame shown is used to support high-tension wires. If W = 200 lb, b = 3 ft, a = 30°, what is the axial force in member HJ?

  Compute dead load due to backfill that the pipe must support

A 300 mm diameter pipe is placed in a 3 m deep rectangular trench that is 0.60 m wide. The trench is backfilled with clay that has a bulk unit weight of 18.8 kN/m3. Compute the dead load due to backfill that the pipe must support.

  What is the level of service expected in each direction

A Class I rural highway segment of 10 miles in level terrain has a base free-flow speed (BFFS) of 65 mph. The cross section has 12-ft lanes and 6-ft clear shoulders on both sides of the road.

  Determine the maximum acceleration of the camera

The vertical velocity of the box at the time that it hits the surface is v= 5m/s. After impact the camera experiences an acceleration of a = -kx, where k is a constant and x is the compression of the packing material.

  Plot the resulting concentration with downstream distance x

Write the mass balance equation for an ideal 1D plug-flow stream under steady state conditions with a first-order decaying substance. Solve for the concentration as a function of the concentration x=0, the rate constant kd, longitudinal distance x..

  Determine what is speed of the car as it passes the light

If the motorist wishes to pass the light just as it turns green without having to stop, what is the required uniform deceleration of the car and what is the speed of the car as it passes the light

  Calculate the decay rate of radon in units of hr-1

Indoor Air quality is greatly affected by Radon, which can cause lung cancer. When we moved to Colorado, we tested the house for Radon and installed a radon mitigation system.

  How much of the borrow material is required to fill the site

The material is brought from a borrow site that has yt=19.5 kn/M63 with w=16.5% and Gs=2.70 How much of the borrow material (in cubic meters) is required to fill the site  How heavy is it

  Freeways density and level of service

What will the freeway's density and level of service be before and after the ban? (Assume that the trucks are removed and all other traffic attributes are unchanged).

  Transportation and management

In the construction management, there is a lot of procurement route that are necessary and suitable for the construction industry.

  Calculating the relative compaction of a dam project

A dam project specifies 97% compaction. Lab tests on the soil being used indicate that it has a maximum dry density of 1900 kg/m 3 at an optimum water content of 13.2%.

  Construction loan and mortgage loan

Differentiate between construction loan and mortgage loan based on your understanding (using your own words). Define the following terms in your own words: (a) cap rate, (b) economic value of a project, and (c) gap financing.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd