Explain the mass fraction water in the humidified air

Reference no: EM13546637

Air containing 1 mass % water is humidified by adding water. If air, dry basis, flows into the humidification process at 957.2 lb/hr and water flows at 0.7 cubic ft per hour, what is the mass fraction water in the humidified air?

Reference no: EM13546637

Questions Cloud

A hot-air balloon is ascending at the rate : A hot-air balloon is ascending at the rate of 13 m/s and is 93 m above the ground when a package is dropped over the side. (a) How long does the package take to reach the ground? ? s (b) With what speed does it hit the ground? ? m/s

Calculate how fast is the light traveling in the liquid : The drawing shows a coin resting on the bottom of a beaker filled with an unknown liquid. How fast is the light traveling in the liquid

Evaluate the thickness of the metal foil in mm : If the metal absorbs 848 J of heat as its temperature changes from 20.09 to 35.71. Calculate the thickness of the metal foil in mm

Calculate what is the moment of inertia of the flywheel : An energy storage system based on a flywheel (a rotating disk) can store a maximum of 4.4 when the flywheel is rotating at 1.4×104 revolutions per minute. What is the moment of inertia of the flywheel

Explain the mass fraction water in the humidified air : Air containing 1 mass % water is humidified by adding water. If air, dry basis, flows into the humidification process at 957.2 lb/hr and water flows at 0.7 cubic ft per hour, what is the mass fraction water in the humidified air

Find the total sound power emitted by the source : A source emits sound uniformly in all directions. There are no reflections of the sound. find the total sound power P emitted by the source

Determine the elongation of the cable : A high-speed lifting mechanism supports a 845-kg object with a steel cable that is 40.0 m long and 4.00 cm2 in cross-sectional area. (a) Determine the elongation of the cable. mm

Explain what should be the thickness of the dielectric layer : An interference filter is to be constructed for isolation of nitrobenzene absorption band at 1537 cm^-1 if it is to be based on first order interference, what should be the thickness of the dielectric layer

Determine the shearing force necessary to shear a steel bolt : Assume that if the shear stress in steel exceeds about 4.00 108 N/m2, the steel ruptures. (a) Determine the shearing force necessary to shear a steel bolt 1.50 cm in diameter. N (b) Determine the shearing force necessary to punch a 1.50-cm-diameter h..

User Account

All Pages