Explain the kinetic energy of the auger electrons

Reference no: EM13231080

In a technique used for surface analysis called auger electron spectroscopy (AES), electrons are accelerated toward a metal surface. These electrons cause the emissions of secondary electrons-called auger electrons-from the metal surface. The kinetic energy of the auger electrons depends on the composition of the surface. The presence of oxygen atoms on the surface results in auger electrons with a kinetic energy of approximately 485 eV.

What is the de Broglie wavelength of this electron?

[KE = 1/2mv^2; 1 electron volt (eV) = 1.602 x 10^-19 J]

Reference no: EM13231080

Questions Cloud

Define the origin of semiconductivity : Draw a band diagram for thermal/photo (Intrinsic) and doped (Extrinsic) semiconductors and explain the origin of semiconductivity.

State the ph of the rainwater assuming all the sulfuric acid : What is the pH of the rainwater assuming all the sulfuric acid is in the liquid water droplet? Hint: The "per m3" means per m3 of air for both [H2SO4] and the cloud liquid water.

Describe the hemophilia and karyotype : Queen Victoria and her role in spreading hemophilia, What is a karyotype, Why is it useful to geneticists, What is a carrier

Explain an x-ray photon of wavelength : An X-ray photon of wavelength 0.978 nm strikes a surface. The emitted electron has a kinetic energy of 975 eV. What is the binding energy of the electron in kJ/mol

Explain the kinetic energy of the auger electrons : These electrons cause the emissions of secondary electrons-called auger electrons-from the metal surface. The kinetic energy of the auger electrons depends on the composition of the surface

Define hydrogen atom relaxes to a lower energy level : An electron in the n = 7 level of the hydrogen atom relaxes to a lower energy level, emitting light of 397nm. What is the value of n for the level to which the electron relaxed?

What is the value of the total circuit complex impedance : An input signal of 10V at 0degrees and a frequency of 1592Hz is applied to a series RLC circuit with resistor R=100ohm, inductor L= 40mH, and a capacitor C=0.5uF. The value of the total circuit complex impedance is

How to combine several resistors to get the desired value : Design a load resistor (resistance rating and power rating) network to have the transformer operate at full load. Design a second network for half load. You may need to combine several resistors to get the desired value.

Explain an atomic emission spectrum of hydrogen : An atomic emission spectrum of hydrogen shows the following three wavelengths: 1875nm, 1282nm, and 1093nm. Assign these wavelengths to transitions in the hydrogen atom.

User Account

All Pages