Explain the difference between ductile and plastic

Assignment Help Mechanical Engineering

Reference no: EM13718439

Material Mechanics

1) Visous 2) Plastic

Please extrapolate examples of each and carefully explain how each form. Also, explain how they play roles in deformation. Lasted, explain the difference between ductile and plastic.

Reference no: EM13718439

Questions Cloud

Ratio of the work output to the heat rejection : A Carnot heat engine operates between two reservoirs at temperatures of 400 K and 500 K,. What is the ratio of the work output to the heat rejection?

Calculate the rise time for the thermocouple : A thermocouple behaves approximately as a first-order system. The element is initially at a temperature of 40°C and suddenly subjected to a temperature of 80°C. The thermocouple indicates a temperature 60°C after 3 s. Calculate the rise time for the ..

Determine the net work and heat transfer for the cycle : A piston-cylinder device contains steam that undergoes a reversible thermodynamic cycle. Initially the steam is at 400 kPa and 350C with a volume of 0.3 m^3. The steam is first expanded isothermally to 150 kPa, then compressed adiabatically to the in..

Assume the pressure at pipe inlet is atmospheric pressure : Water drains from a catch basin (with negligible water depth) through a 20-cm diameter, 40 m long concrete pipe flowing full with a surface roughness of 1.2 mm and a downward slope of 2o. Determine the flow rate (volume flow rate) of water from the c..

Explain the difference between ductile and plastic : Material Mechanics- Visous and Plastic. Please extrapolate examples of each and carefully explain how each form. Also, explain how they play roles in deformation. Lasted, explain the difference between ductile and plastic.

Neglect the inlet air velocity to the fan : A fan is located in a 0.5 m x 0.5 m duct. The average air velocity at the fan outlet is 10 m/s and the air density is 1.2 kg/m^3. Determine the mass flow rate of air and the electric power consumption of the fan motor. (Neglect the inlet air velocity..

Particular polymer has a critical stress intensity parameter : A particular polymer has a critical stress intensity parameter of 5 MPa?m^1/ 2 and a strength of 150 MPa. It is being used as a plate that experiences tension. The maximum stress it is designed to experience is 80% of its strength.

Air expands through a nozzle and exits supersonically : Air expands through a nozzle and exits supersonically. The throat area is 10 cm2, and the throat pressure is 100 kPa. Find the pressure on either side of the throat where the duct area is 24 cm2

The van der waals equation and the redlich-kwong equation : A rigid tank has a volume of 23.3 m3 and due to safety requirements its pressure should not exceed 105 bar. If the tank has been filled with 1000kg of water vapor and is heated to 360°C check to see if it is within safety requirements.

User Account

All Pages