Explain the delta h for the neutralization of naoh

Reference no: EM13323461

A 61mL sample of 1 M NaOH is mixed with 48 mL of 1 M H2SO4 in a large styrofoam coffee cup; the cup is fitted with a lid through witch passes a calibrated thermometer. The temp of each solutions are before mixing is 23.9 C. After adding the NaOH solution to the coffee cup, the mixed solutions stirred until reaction is complete. Assume that the density of the mixed solution is 1g/mol, that the specific heat of the mxture is 4.18 j/(gC) and that no heat is lost to the surrounding. The delta H for the neutralization of NaOH with H2SO4 is -144kj/mol H2SO4. What is the maximum measured temperature in the styrofoam cup?

Reference no: EM13323461

Questions Cloud

What is the specific discharge in the rectangular channel : A large concrete channel holds a hydraulic jump in which the subcritical depth of flow is 2.5 m. If 40 percent of the specific energy in the flow is lost through the hydraulic jump, what is the specific discharge in this rectangular channel

Divide the sodium hydroxidecharge into 10 smaller charges : Divide the sodium hydroxidecharge into 10 smaller charges, and add them one at a time, makingsure that each is well mixed and the tank temperature has stoppedincreasing before adding the next charge.

Find acceleration and direction of the motion of the system : 3 objects are connected on an inclined table with the masses of 8.0kg, 4.0kg and 2.0kg and the pulleys are frictionless. determine the acceleration and direction of the motion of the system

Determine the total solids in the sample : A surface water sample has been evaporated until dry in a crucible dish. The dry (tare) weight of the crucible is 44.642gm. The weight of the residue plus the cruciible is 44.6484gm.

Explain the delta h for the neutralization of naoh : The delta H for the neutralization of NaOH with H2SO4 is -144kj/mol H2SO4. What is the maximum measured temperature in the styrofoam cup

Determine the required bolt spacing in the longitudinal x : A 10 m long built-up beam is to be fabricated from a universal section beam (UB) and two 'C' channel sections (as indicated). The beams are joined by bolts, with the allowable shear load in each bolt being 12 kN.

What frequency would be required : If a 2.4 m wave was created using a frequency of 63 Hz, what frequency would be required to creat the next higher harmonic

How to determine the two possible depths of flow : A 200 m wide natural stream, whose cross-section can be approximated by a rectangular cross-section, contains a dischargeof 80 cumecs. If the specific energy of the flow is 1.5 timesthe minimum specific energy

How long is her shadow : A 5.4ft -ft-tall girl stands on level ground. The sun is 30? above the horizon. How long is her shadow

User Account

All Pages