Explain sodium acetate and hydrocloric acid

Reference no: EM13228078

In ploystyrene beaker , we mixed 30 mL of 0.1 M sodium acetate and 15 mL of 0.1 M hydrocloric acid. we measured the PH ( in PH meter ) it was 4.86 and then we added 5 mL of 0.1 M NaOH to this buffer. we measured the PH by (PH meter) it was 5.33 how much the PH of solution befor adding NaOH and after adding NaOH.

Reference no: EM13228078

Questions Cloud

What is the new current feeding the combined loads : A 150 KVAR capacitor is connected across the line in Problem 1. (a) Sketch and label the power triangle for the capacitor. (b) Sketch and label the power triangle for the combined loads (capacitor and motor).

State the mass fraction of fe2o3 in the original sample : When heat and a stream of H2 gas is applied to the sample, the Fe2O3 reacts to form metallic Fe and H2O(g). The Al2O3 does not react. If the sample residue weighs 2.499 g, what is the mass fraction of Fe2O3 in the original sample?

Find the rms current into the motor : A 450 kW motor operating 73% Power factor lagging is connected to a 120V(rms), 60Hz line. (a) Sketch and label the power triangle for the motor. (b) Find the rms current into the motor.

Explain methyl red-hcl and ammonia : For each of these three possible indicators, give an example of an analyte and a titrant which best suits its use. changes color when the solution is slightly acidic (methyl red-HCl and ammonia?)

Explain sodium acetate and hydrocloric acid : In ploystyrene beaker , we mixed 30 mL of 0.1 M sodium acetate and 15 mL of 0.1 M hydrocloric acid. we measured the PH ( in PH meter ) it was 4.86 and then we added 5 mL of 0.1 M NaOH to this buffer.

Find the mass of the saturated liquid and of saturated vapor : the saturated liquid and vapor mixture at t=300c and quality of 75%.the mixture occupies a volume of 0.05 m^3 (a) find the specific volume in m^3/kg (hints: vf= 0.0014 vg=0.02167m^3/kg at t =300c) (b) find the mass of the mixture in kg.

Find the surface temperature in f of the computer chip : For computer chip of 10mm (length), 10 mm(width) is operated by power of 0.345 watt, which surrounded by coolant material of temp of 70 F. The Internal energy rate is 3.5J/sec and kinetic energy rate is -4.5J/sec.

Explain a buffer solution with a ph : A Buffer solution with a pH reading of 8.50 was prepared by mixing 0.25 mole acid(HA) and 0.05 mole NaOH in 500.0ml DI water.

What is the electrical input power in watts of the motor : A motor operated from a 480 V(rms), 60 Hz source has an output of 800 hp. The motor is 89% efficient and has a power factor of 69.5% lagging. What is the electrical input power in watts of the motor

User Account

All Pages