Explain how will such a procedure produce a greater flowrate

Assignment Help Civil Engineering
Reference no: EM13321418

A 12in diameter water main in your city has become very rough due to rust and corrosion, it has been suggested that the flowrate through the this pipe can be increased by inserting a smooth plastic liner into the pipe. Although the new diameter will be smaller, the pipe will be smoother. Will such a procedure produce a greater flowrate?

Reference no: EM13321418

Questions Cloud

What is the exit pressure p2 if friction head loss is 350 ft : Water ?ows at 6 ft/ s through a pipe 500 ft long with diameter 1 in. The inlet pressure p1= 200 psig, and the exit section is 100 ft ft higher than the inlet.
What do you notice about the relationship between m and b : The money supply (M) is the sum of bank deposits (D) plus currency in the hands of the public (call that C). Suppose the required reserve ratio is 20 percent and the Fed provides $50 billion in bank reserves (R = $50 billion).
What is the length of the telescope : You wish to design a telescope using an objective lens with f(objecive) = 0.75 m. If you use an eyepiece with a magnification of 20, what is the length of the telescope
Explain how adding a solution of koh : Describe how adding a solution of koh to the original sulfide precipitate results in the seperation of SN4+ ion from the other group II cation
Explain how will such a procedure produce a greater flowrate : A 12in diameter water main in your city has become very rough due to rust and corrosion, it has been suggested that the flowrate through the this pipe can be increased by inserting a smooth plastic liner into the pipe.
Critically analyse the view that the free market system : Since the recent recession of 2007-2009, there has been increasing disillusionment with the free market system. Critically analyse the view that the free market system is the best and only realistic alternative for determining the allocation of resou..
The thorntons plccase study : Using the data and information provided in the ‘Thorntons plc’case study
Explain enter scientific notation as 1.23e4 : Enter que Determine the following characteristics of the titration curve for 25.0 mL of 0.400 M NH3(aq) titrated with 0.335 M HI(aq). (For NH3, Kb = 1.8x10-5.) Enter scientific notation as 1.23E4.
Find the center of gravity of the given composite body : Find the center of gravity of the given composite body when the specific weight of brass is .306 lb/in^3 and the specific weight of aluminum is .101 lb/in^3

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the saturation ratio with dry bulk density

a soil has a moist buldk density of 1950 kg/m^3, a dry bulk density of 1750 kg/m^3, and a soilds mass density of 2650 kg/m^3. determine the saturation ratio

  Determine what is the magnetic declination of a line

The magnetic declination of 1986 was 5 degrees 15 minutes. The magnetic bearing of a line was N 89 degrees 49 minutes W. At todays present the magnetic bearing of a line is S 88 degrees 20 minutes W.

  Will the ship take more or less draft when steaming

A 245 m ship has a displacement of 3x10^8N,and the area defined by the waterline is 3550m^2. will the ship take more or less draft when steaming from salt water to fresh water How much will it settle or rise

  Determine the depth of water in the pond

water is pumped into an irrigation pond at 250 gal/min for 24 hours. the pond area is 2500 square feet. Determine the depth of water in the pond .Provide answer in ft and m

  Determine what is the darcy velocity of the groundwater

An unconfined, gravel-sand aquifer has a porosity of 0.23, and a hydraulic conductivity of 1000 m/day. Two monitoring wells are 260 m apart, and the difference in their water levels is 0.3 m.

  Determine the time it takes the block to reach position b

The initial velocity of the brick in position A is 40 ft/s. If the coefficient of kinetic friction between the block and the plate is .40, determine the time it takes the block to reach position b on the horizontal axis.

  Determine soil bearing pressure with settlement limitation

The soil below the footings consists of a medium grain sand (SP) and water is located at a depth of 5 feet below the ground surface. The preliminary structural plan calls for a 10 foot wide footing located at a depth of 5 feet which must support a..

  Calculate the ammonia concentration in mg per l

NH4+ = N+ + NH3 pK =9.24 If the pH is 8.5 and the ammonium(NH4+) concentration in 20mg/L, calculate the ammonia(NH3) concentration in mg/L.

  What conclusions can be drawn about viability of approach

One accident mitigation procedure is called emergency material transfer, in which the material is transported away from the accident site before it becomes involved. We plan on mitigating a crude oil tank fire scenario by pumping the tank empty in..

  Specify the hydraulic retention time for a pfr designed

In each experimental run, the concen tration of free available chlorine was varied and the time required to kill 99% of the organisms was determined. The results showed that a CT value of 200 min mg/L was sufficient to achieve a 2-log removal.

  Determine what is the runoff rate into the inlet grate

A paved parking lot section has a uniform slope over a length of 100 m (in the flow direction) from the point of a drainage area divide to the inlet grate, which extends across the lot width of 30 m.

  Determine speed of block after it has compressed the spring

a 20 kg block slides along the rough surface for which the coefficient of kinetic friction is 0.2. The block strikes a nonlinear spring with a speed of v=4.5 m/s. The spring is termed "nonlinear" because it has resistance of Fs=ks^2

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd