Explain how to classify the column as slender or non slender

Assignment Help Civil Engineering
Reference no: EM13312071

For a concrete column that is part of a braced frame, if the column is square, tied, 18 inches per side, 16 feet long, classify the column as slender or non slender. Assume that at one end of the column a clockwise moment of 100 k-ft is present, and that at the other end of the column a counter-clockwise moment of 25 k-ft is present. you may assume that k= 1.

Reference no: EM13312071

Questions Cloud

Determine the appopriate set of pi terms in a tank : The power, P, required by an agitator in a tank is a function of the following variables, diameter of the agitator, D, Frequency of the impeller rotation, w (1/s), Viscosity of liquid, u (lbss/ft^2) and the density of the liquid ,p (slugs/ft^3)
Define the equation showing the s-trans : Write the equation showing the S-trans to S-cis equilibrium of the two conformations for a. (E)-1,3-pentadiene b. (Z)-1,3-pentadiene and which equilibrium will favor the s-tans conformation more strongly?
Write a business plan, prior to starting a new venture : Should Nascent Entrepreneurs write a business plan, prior to starting a new venture?
What is the spring stiffness constant of the spring : A 950-kg car strikes a huge spring at a speed of 20 m/s, compressing the spring 5.5 m. What is the spring stiffness constant of the spring
Explain how to classify the column as slender or non slender : Assume that at one end of the column a clockwise moment of 100 k-ft is present, and that at the other end of the column a counter-clockwise moment of 25 k-ft is present. you may assume that k= 1.
Select the selection which correctly characterizes : Choose the selection which correctly characterizes all three of the following substances in terms of whether they are polar or nonpolar
Find the bod5 of the final effluent using the nrc equation : A two-stage trickling filter plant treats 291.7 m3/h of municipal wastewater that has a BOD5 of 200 mg/L. The two filters have equal dimensions (depth = 1.68 m; diameter = 21.3 m), and each has a recycle ratio of 1.0
Summary of a professional ethics article : Summary of a Professional Ethics Article
Find what is the major head loss in a coarse concrete pipe : What is the major head loss in a coarse concrete pipe with a diamter of 1ft that is 100 ft long. Water flows at a rate of 20 ft^3/s (viscosity of water = 2.344x10^-5 lbfs/ft^2, density of water = 1.94 slugs/ft^3) 1inch = 25.4mm

Reviews

Write a Review

Civil Engineering Questions & Answers

  Design a shore river intake system in a cold climate

Provide the minimum number of ports. The design conditions are: Winter design fl ow rate  4,300 m 3 /d Minimum river elevation held constant by lock and dam system  99.0 m 500-year fl ood elevation  113.3 m River bottom elevation  90.4 m

  Find the minimum flow rate of air

Find the minimum flow rate of air and the heat exchanger second-law efficiency.

  How much will each leg shorten under the applied

given that E for the tube material is 70 GN/m2 and the stool legs are 75cm long, how much will each leg shorten under the applied compressive load (take g = 9.8m/s2)

  Investigate the possibility of environmental problems

Investigate the possibility of environmental problems that faced by the area of disaster.

  Determine the change in effective stress in the clay

a layer of sand 4 m thick, overlies a layer below permeability clay, 5m thick. the bulk unit weight of the sand is 16.5 KN/m^3 and its saturated unit weight is 18 KN/m^3. the saturated unit weight of the clay is 21 kN/m^3.

  Compute dead load due to backfill that the pipe must support

A 300 mm diameter pipe is placed in a 3 m deep rectangular trench that is 0.60 m wide. The trench is backfilled with clay that has a bulk unit weight of 18.8 kN/m3. Compute the dead load due to backfill that the pipe must support.

  Determine the uniform flow depth in a rectangular channel

Determine the uniform flow depth in a rectangular channel 2.5 m wide with a discharge of 3 m3/s. The slope is 0.0004 and Manning's roughness coefficient is 0.015

  Find horsepower lost to friction between reservoir and jet

water from a reservoir is being supplied to a powerhouse that is located at an elevation 935 ft below that of the reservoir surface. Discharging through a nozzle, the water has a jet velocity of 240 fps and a jet diameter of 6 in.

  Determine the relative humidity using psychrometric chart

The wet bulb and dry bulb temperatures for humid atmospheric air (at 100 kPa) are measured to be 20 C and 25C respectively. Determine: a. using the psychrometric chart, the relative humidity  b. using the psychrometric chart, the humidity ratio

  Find the flow rate per unit thickness for a section midway

Two piezometers are located 1000 ft apart with the bottom located at depths of 50 ft and 350 ft, respectively, in a 400-ft-thick unconfined aquifer. The depth to the water table is 50 ft in the deeper piezometer and 40 ft in the shallow one.

  Calculate the heat transfer per unit mass during expansion

Calculate the heat transfer per unit mass during the expansion if the exit temperature is 50 degrees celcius.

  How to compute a satisfactory curve length of the highway

A highway reconstruction project is being undertaken to reduce crash rates. the reconstruction project involves a major realignment of the highway such that a 60mi/h design speed is attained.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd