Explain assuming that seawater has a total ion concentration

Reference no: EM13288797

In reverse osmosis, water flows out of a salt solution until the osmotic pressure of the solution equals the applied pressure. If a pressure of 75.0 bar is applied to seawater, what will be the final concentration of the seawater at 20 °C when reverse osmosis stops? Assuming that seawater has a total ion concentration (a.k.a colligative molarity) of 1.10 Mc, calculate how many liters of seawater are needed to produce 15.4 L of fresh water at 20 °C with an applied pressure of 75.0 bar.

Reference no: EM13288797

Questions Cloud

What operation is performed by the combination of flip-flops : A 500 Hz square wave is applied to theCK input of a T flip-flop with T held high. (a) Draw 6 cycles of the square wave along with thecorresponding flip-flop output. (b) Draw a circuit showing two T flip-flops in tandem andthe waveform of the output o..

Explain what is the molarity of h2c4h4o6 : What is the molarity of H2C4H4O6 if 31.75 mL of 0.1749 M KOH are required to react with 10.04 mL of H2C4H4O6 solution according to the reaction below

How much work does the intern do by pushing the patient : An intern pushes a 72 kg patient on a 15 kg gurney, producing an acceleration of 0.60 m/s2. How much work does the intern do by pushing the patient and gurney through a distance of 2.5 m

Find the peak power delivered to the machine : The rms current in a copy machine is 5.26 A, and the resistance of the machine is 19.7?. find the peak power delivered to the machine

Explain assuming that seawater has a total ion concentration : Assuming that seawater has a total ion concentration (a.k.a colligative molarity) of 1.10 Mc, calculate how many liters of seawater are needed to produce 15.4 L of fresh water at 20 °C with an applied pressure of 75.0 bar.

Determine the current as a function of time : An unusual capacitor has a capacitance that is a function of time given by C = 2 + cos(2000t) μF in which the arugument of the cosine functionis in radians. A constant voltage of 50V is applied to this capacitor.

Determine the maximum thickness of ice : The rear window of a van is coated with a layer of ice at 0°C. The density of ice is 917 kg/m3, What is the maximum thickness of ice above this area that the defroster can melt in 3.9 minutes

Explain the ph after the addition of each acid : A 119.6ml sample of 0.110M methylamine (CH3NH2) is titrated with 0.255 M HNO3 . Calculate the pH after the addition of each of the following volumes of acid.

Derive a circuit using d flip-flops to generate clock signal : Given a 100MHz clock signal, derive a circuit using D flip-flops to generate 50HHz and 25MHz clock signals. Draw a timing diagram for all three clock signals, assuming reasonable delays.

User Account

All Pages